AEG FSB34707Z User Manual page 16

Activating ExtraPower increases the
water and energy consumption as well as
the programme duration.
9.4 How to start the AUTO Sense
program
1. Press .
The light related to the button is on.
2. Close the appliance door to start the
program.
The appliance senses the type of load and
adjusts a suitable wash cycle and its duration.
9.5 How to delay the start of a
programme
You can delay the start of the selected
programme by 3 hours.
1. Select a programme.
2. Press .
The light related to the button is on.
3. Close the appliance door to start the
countdown.
During the countdown, it is not possible to
change the programme selection.
When the countdown is complete, the
programme starts.
9.6 How to cancel the delay start
while the countdown operates
Press and hold for about 3 seconds.
The appliance returns to the programme
selection.
If you cancel the delay start, you have to
select the programme again.
9.7 How to cancel a running
programme
Press and hold for about 3 seconds.
16 ENGLISH
The appliance returns to the programme
selection.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
9.8 Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect the
energy consumption and the programme
duration. After closing the door, the appliance
continues from the point of interruption.
If the door is opened for more than 30
seconds during the drying phase, the
running programme ends. It does not
happen if the door is opened by AirDry
function.
9.9 The Auto Off function
This function saves energy by switching the
appliance off when it is not operating.
The function comes into operation
automatically:
• When the programme is completed.
• After 5 minutes if a programme was not
started.
9.10 End of the programme
When the programme is complete, the Auto
Off function switches the appliance off
automatically.
All buttons are inactive except for the on/off
button.