Loading And Saving Daw Presets - Alesis VX49 User Manual

Loading and Saving DAW Presets

If you are not using VIP, Main Mode will show a list of presets that let you use VX49 to control your DAW. We've
pre-mapped each so you can use VX49 to control your DAW in the most logical and intuitive way possible.
To load a DAW preset:
1. Use the Cursor Buttons to select the DAW Preset Browser
(the list of DAW presets in the right half of the display).
2. Turn the Data Dial to scroll through the list.
3. Press the Data Dial to load a DAW preset. The loaded
preset will be highlighted.
You can also save DAW presets with your own custom MIDI mappings (made in
save over an existing DAW preset or one of the user presets (User Preset Default ##).
To save a DAW preset:
1. With the desired DAW preset already selected, use the Cursor Buttons to select Save in the upper-right
corner of the display.
2. Press the Data Dial. The preset's name in the left half of the display will be highlighted.
3. Enter a new name for the preset by using the following controls:
• To move to the previous or next character, press the Left Cursor or Right Cursor, respectively.
• To add a new character, press the Right Cursor at the end of the name.
• To add a space, press the Up Cursor.
• To change the current character, turn the Data Dial.
• To delete the current character, press the Down Cursor.
4. Press the Data Dial. The preset is now saved.
MIDI Edit Mode). You can
20