Removing Memory Module - Toshiba Equium A60-199 User Manual

Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
8. Seat the cover and secure it with one screw.
9. When you turn the computer on, it should automatically recognize the
total memory capacity. Use the HW Setup program to verify that the
added memory is recognized. If it is not recognized, check the
module's connection.

Removing memory module

To remove the memory module, make sure the computer is in boot mode
then:
1. Turn the computer off and remove all cables connected to the
computer.
If you use the computer for a long time, the memory module will become
hot. In this case, let the memory module cool to room temperature before
you replace them.
Do not try to remove a memory module with the computer turned on or
turned off in Standby and Hibernation mode. You can damage the
computer and the memory module.
2. Turn the computer upside down and remove the battery pack (refer to
Chapter 6, Power and Power-Up Modes.)
3. Remove one screw securing the memory module cover.
4. Lift off the cover.
TOSHIBA A60 Series
Inserting the memory module
Optional Devices
8-5