Keyboard - Toshiba Equium A60-199 User Manual

You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
U
N
1
C
This procedure does not affect the settings.
* In this computer, CD refers to the DVD-ROM,CD-R/RW or CD-RW/
DVD-ROM drives.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. The following menu will be displayed.
3. Use the up/down cursor keys to select boot device you want and
press Enter.
If a supervisor password is set, the menu above does not appear when
you use the user password to start the computer.
The selection method above does not change the boot priority settings in
HW Setup.
If you press a key other than one of those above or if the selected device
is not installed, the system will boot according to the current setting in HW
Setup.

Keyboard

Wake-up on Keyboard
When this feature is enabled and the computer is in standby mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in standby mode.
Enabled
Disabled
TOSHIBA A60 Series
Selects the USB diskette drive.
Selects the Network.
Selects the primary HDD.
Selects the CD-ROM*.
Enables Wake-up on Keyboard.
Disables Wake-up on Keyboard. (Default)
HW Setup and Passwords
7-7