CAUTION Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. PRECAUTIONS BEFORE USE KEEP THESE INSTRUCTIONS IN MIND: 1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.
28.If the product contains or is delivered with a remote control containing coin/cell batteries: Warning: “Do not ingest battery, Chemical Burn Hazard” or equivalent working. [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
LOCATION OF CONTROLS 1. MEMORY: Press to save radio stations to a preset. 9. LOCK: Press and hold to lock controls on radio. 2. POWER: Press to power the radio on. Press and hold again to unlock controls 3. SCAN: Press to make a full scan.
POWER YOUR RADIO Using the Power Adapter (included) 1. Plug the power adapter (included) into the AC power input on the side of your radio. 2. Plug the other end of the power cord into an outlet. WARNING: WHILE THE RADIO IS USING BATTERY POWER, TAKE ALL THE BATTERIES OUT BEFORE USING THE POWER ADAPTER Using Battery Power...
USING YOUR RADIO Turning Your Radio On and Off Press the POWER button on the front of the radio to Power the radio on. Press the POWER button again to power the radio off . Finding a Radio Station Note: To improve reception it is recommended to fully extend the antenna on the back of the radio. 1.
Power Adapter Information Value and and precision Manufacturers name or trade DongGuan Obelieve Electronic mark, commercial registration Co.,Ltd and address Model Identifier OBL-0590500E Input voltage AC 100-240V Input AC frequency 50/60Hz Output voltage DC 5.9V Output current 0.5A Output Power Average active efficiency 74.29% Efficiency at low load...
Guarantee Lenco offers service and warranty in accordance with the European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly.