Sony TRINITRON KV-29F3A Service Manual page 9

8
—k_ & @@ }
Presetting Channels Automatically
With this function, the TV can automatically search and store up to 100 different
channel numbers.
If you prefer manual presetting, refer to "Presetting Channels Manually" on page
13.
1 Plug into mains.
Press the power switch © [I on the TV set.
2 Press and hold the button E15) on the TV set until the automatic
menu is displayed and the search starts.
After all available channels are stored, the normal TV picture is shown.
Note: Channels are automatically stored as follows:
Programme 1 BBCI
Programme 2 BBC2
Programme 3 ITV
Programme 4 CH4 or S4C
Programme 5 CHS (if available in your area)
Getting Started
TV Operation
TV Operation
This section explains functions used whilst watching TV. Most
operations are carried out using the remote commander (numbers in
circles). All basic functions are also available on the TV set (letters in
boxes). Open the flap at the front of the Instruction Manual to see the
illustrations of the Remote Commander and the TV set.
To
Switch on
Switch off temporarily
Switch on from standby
mode
Switch off completely
Select programmes
Display on screen
indications
Adjust the volume
Mute the sound
Display the time (only
available when teletext
is broadcast)
View programmes
in 16:9 mode
Press
OMonTv
oo
TV is now in standby mode and ()
indicator on TV lights up.
© @, PROGR +/- @ @ or any number
button ®
OMonTv
To save energy, switch off your TV
completely when TV is not in use.
PROGR +/- ® (@ or number buttons @
For double digit number, press -/- - ® then
the number
e.g. For 23, press -/- - ® then 2 and 3.
©. Press again to make the indications
disappear.
4+or-O
°X @. Press again to restore the sound.
©. Press again to make the display
disappear.
£3 @. Press again to return to
4:3 mode.
TV Operation | 9