Table of Contents
Advertisement
—oz—
30
a
A
Selecting Input and Output Signals
This section explains how to select the output signal from > 2/-89 2
and how to select and view the input. You can use direct access buttons
- @ BG to select the input or the menu system to select input and output.
Selecting Input Signals With Direct Access Buttons
Press ©) @ Hi repeatedly .
Press C @ to restore the normal TV picture.
Symbol on the screen
Input Signal
1
Audio/video through Euro AV connector
ao)
RGB through Euro AV connector
22
Audio/video through Euro AV connector
32
S video through Euro AV connector [M]
53
Audio/video through the phono jacks
33
S video through the 4 pin DIN
1 Press the MENU button ®.
2 Pash joystick @ to blue or green to
Cd
select +} for "Video Connection"
Ele avehees,
O
then push to yellow.
fe} Out
Tye
onal
2
Ww
a
[|
4. Push to red or yellow repeatedly to select the desired input or output source then
press the joystick ®.
55 Press the MENU button @ to restore the normal TV picture.
Note: If you select 'AUTO'for output, the output source automatically becomes the
same as the desired input source.
Optional Equipment
Using AV Label Preset
This function enables you to label the input sources using up to five
characters (letters or numbers).
1 Press the MENU button ®.
2 Push joystick ® to blue or green to select the symbol [J on the screen then push
to yellow.
3 Push to blue or green to select
"AV Label Preset' then push
to yellow.
ooooo8
4. Pashto blue or green to select the desired input source then push to yellow.
5 push to blue or green to select a letter or number then push to yellow (select ~' for
a blank).
Select the other four characters in the same way.
6 after selecting all the characters, press the joystick @.
7 Repeat steps 4 to 6 to label other input sources.
8 Press the MENU button © to restore the normal TV screen.
Optional Equipment
31
Advertisement
Table of Contents
