Table of Contents
Advertisement
Chapter 13
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
Note: Before you enable
VPN
static IP address for router's WAN port and synchronize your
3. In the
Client IP Address
leased to the devices by the PPTP VPN server.
4. Set the PPTP connection permission according to your needs.
•
Select
Allow Samba (Network Place) access
your local Samba server.
•
Select
Allow NetBIOS passthrough
Samba server using NetBIOS name.
•
Select
Allow Unencrypted connections
your VPN server.
5. Click SAVE.
6. Configure the PPTP VPN connection account for the remote device. You can create
up to 16 accounts.
1 ) Click Add.
2 ) Enter the
Username
Server.
VPN Server
> PPTP, and tick the
Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
field, enter the range of IP addresses (up to 10) that can be
and
Password
Enable
box of PPTP.
System Time
with internet.
to allow your VPN device to access
to allow your VPN device to access your
to allow unencrypted connections to
to authenticate devices to the PPTP VPN
VPN Server&Client
67
Advertisement
Table of Contents
