Table of Contents
Advertisement
5.2.6 CHANNEL EXTRA SETTINGS
Logical Channel Numbering LCN
This function sort channels automatically to logic order in DVB-T modus if broadcaster support this function.
Press ENTER to select On or O .
Dynamic Rescan
This function can search changes or for new channels automatically. Press ENTER to select On or O . NOTE: if
set to On, your channel list sorting can be changed if new channels are found.
Edit the programmes. You can press the COLOUR BUTTONS on the remote control to skip programmers,
Programme Edit
rename and delete programmes or move programmer. To add channels to Favourite lists, press the
on the remote control, to open Favourite lists. Select with The
add to favourite lists, and press the COLOUR BUTTONS to add the channel to the desired favourite lists, RED:
Fav A, GREEN: Fav B, YELLOW: Fav C, BLUE: Fav D. After you added the channel to the desired favourite lists
a star symbol appear next to the channel name inside with the Favourite Group name: A, B, C, D. You can
add the same channel to multiple favourite lists, pressing the COLOUR BUTTONS. If you want to remove the
channel from the favourite list repeat the above steps. "
Cl information
In the case you use an CI Module for decoding encoded channels, this menu shows the internal menu of the
card and/or CAM.
Signal Information Showing the information of current DTV channel. Only available with DTV signal.
Channel Type
Select FTA to search Free-To-Air channels only, or ALL to search FTA and Encrypted channels.
NOTE:
If Logical Channel Numbering function is set to ON then sorting of channels is not possible in normally way.
Logical Channel Numbering is not functioning in satellite mode.
5.3 PICTURE MENU
Picture Mode
Select one of the automatic picture control mode. Available choices are Home, Vivid, Standard, Mild. Select
User to adjust Contrast, Brightness, Colour and Sharpness as you like.
Colour Temperature Select the overall colour tone of the picture. Available choices are User, Cool, Standard, Warm. Noise
Reduction, Eliminates noise in the picture. Available choices are O , Low, Middle, High and Default.
5.3.1 CONTRAST/BRIGHTNESS/COLOUR
If Picture Mode is set to User you are able to change the following settings.
pq
Press
to select an option, then press
Contrast
Adjust the highlight intensity of the picture, but the shadow of the picture is invariable.
Brightness
Adjust the optical ber output of the entire picture, it will e ect the dark region of the picture.
Colour
Adjust the saturation of the colour based on your own preference.
Tint
No function
5.3.2 COLOUR TEMPERATURE
In this menu you can change the overall colour cast of the picture.
pq
Press
to select Colour Temperature, then press ENTER to enter a sub-menu. Press
Cold
lncrease the blue tone for the white.
Standard
Increase the neutral colours for the white.
Warm
lncrease the red colour for the white.
5.3.3 NOISE REDUCTION
In this menu you can lter out and reduce the image noise and improve picture quality. Press
press ENTER to enter a sub-menu.
O
Select to turn o video noise detection.
Low
Detect and reduce low video noise.
Middle
Detect and reduce moderate video noise.
High
Detect and reduce enhanced video noise.
Default
Set as Default.
5.4 SOUND MENU
Sound Mode
Select your favourite sound mode for each input. Choices are Standard, Music, Movie, Sports and User.
Treble
Adjusts the higher frequency of the sound.
Bass
Adjusts the lower frequency of the sound.
Balance
Control the sound balance between the right and left loudspeaker (earphone).
Auto Volume
Adjust the volume corresponding to the input audio level. Options are On and O .
t u
to adjust.
12
pq
buttons the channel which you want to
pq
to select the relevant picture e ect.
pq
to select Noise Reduction, then
button
Advertisement
Table of Contents
