Ninja AMZ493BRN Owner's Manual page 4

IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
36 Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers
to shatter and potentially result in
personal injury and property damage.
37 Keep hands and utensils out of
containers while chopping to reduce
the risk of severe personal injury or
damage to the blender/food chopper.
A scraper may be used ONLY when the
blender or processor is not running.
38 If you find unmixed ingredients sticking to
the sides of the cup, stop the appliance,
remove the blade assembly, and use a
scraper to dislodge ingredients.
39 DO NOT open pour spout cap while
blender is operating.
40 If you find unmixed ingredients sticking
to the sides of the pitcher, stop the
appliance, remove the lid, and use a
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
41 DO NOT attempt to remove the
container or lid from the motor base
while the blade assembly is still
spinning. Allow the appliance to come
to a complete stop before removing
lids and containers.
42 If the appliance overheats, a thermal
switch will activate and temporarily
disable the motor. To reset, unplug
the appliance and allow it to cool for
approximately 30 minutes before
using again.
43 DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
44 If using the pour spout, hold the cover
in place on the container, or ensure lid
lock is engaged, when pouring to avoid
risk of injury.
6
ninjakitchen.com
45 Remove the Pro Extractor Blades®
Assembly from the Single-Serve Cup
upon completion of blending. DO
NOT store ingredients before or after
blending them in the cup with the
blade assembly attached. Some foods
may contain active ingredients or
release gases that will expand if left in a
sealed container, resulting in excessive
pressure buildup that can pose a risk
of injury. For ingredient storage in the
cup, use only Spout Lid to cover.
46 The maximum wattage rating for this
appliance is based on the configuration of
the Pro Extractor Blades Assembly and
Single-Serve Cup. Other configurations
may draw less power or current.
47 DO NOT submerge the motor base or
control panel in water or other liquids.
DO NOT spray motor base or control
panel with any liquid.
48 DO NOT attempt to sharpen blades.
49 Turn off the appliance and unplug the
motor base before cleaning.
50 Unit is intended to create a dough ball.
It is NOT intended to continuously
knead. After dough ball forms, additional
kneading should be done by hand
on a work surface. If the unit moves
excessively on the work surface, remove
the dough ball and knead by hand.
SAVE THESE INSTRUCTIONS
7
ninjakitchen.com