Table of Contents
Advertisement
Installation Instructions: Important information
Old appliances are not worthless
rubbish. Valuable raw materials can be
reclaimed by recycling old appliances.
Before disposing of your old appliance,
render it unusable.
You received your new appliance in a
protective shipping carton. All packaging
materials are environmentally friendly and
recyclable. Please contribute to a better
environment by disposing of packaging
materials in an environmentally-friendly
manner.
Please ask your dealer or inquire at your
local authority about current means of
disposal.
The extractor hood can be used in
exhaust air or circulating air mode.
Always mount the extractor hood over
the centre of the hob.
Minimum distance between electric hob
and bottom edge of extractor hood:
650 mm.
The extractor hood must not be
installed over a solid fuel cooker – a
potential fire hazard (e.g. flying sparks) –
unless the cooker features a closed,
non-removable cover and all national
regulations are observed.
The smaller the gap between the
extractor hood and hotplates, the greater
the likelihood that droplets will form on the
underside of the extractor hood.
10
All manuals and user guides at all-guides.com
Additional information concerning gas
cookers:
with the relevant national statutory
regulations (e.g. in Germany: Technische
Regeln Gasinstallation TRGI).
regulations and installation instructions sup-
plied by the gas appliance
manufacturer.
be installed next to a high-sided unit or high
wall. Gap at least 50 mm.
between the upper edge of the trivet
and lower edge of the extractor
hood:
When installing gas hotplates, comply
Always comply with the currently valid
Only one side of the extractor hood may
Minimum distance on gas hotplates
650 mm.
min 650
Advertisement
Table of Contents
