Gps Status - TomTom Navigator Navigator 4 Quick Start And User Manual

If your favourite list is empty the icon is dimmed and cannot be selected.
If the location changes for one of your favourites you should create this as a new location.
Deleting a favourite will be executed immediately without a confirmation.
Related topics:
For an explanation on how to use the browser to select a favourite, see the

4.8. GPS status

Check your GPS signal or configure your GPS by tapping GPS status
The GPS status screen shows detailed information on the GPS signal you receive:
On the GPS status screen is shown:
The longitude and latitude are displayed using the
The driving direction is shown in degrees compared to the north
The driving speed
The Universal Time Code (UTC), the time according to the GPS signal which is not the local time
An icon which shows, when circling, if your GPS device is well connected and it receives data
The schematic representation of the sky showing the positions of the satellites
Measuring bars for the signal strength of each visual satellite, locked satellites are shown in blue
Configure GPS
Use and to browse through the list of supported GPS devices until your GPS device is shown. Specify your GPS device
by selecting DONE.
Note:
When you select "Other Cable NMEA GPS" as your GPS device you might need to specify a baud rate. Refer to your NMEA
GPS receiver manual to find out the used baud rate. For many devices this will be 4800 baud.
browser usage
.
distance units
description.