TomTom Navigator Navigator 4 Quick Start And User Manual page 30

The menu pops up when you tap roughly in the middle of the
through the pages. You select an icon by tapping it. Until you take your stylus or finger off the screen, icons and buttons are
only highlighted, not yet selected. When a menu option is not available, the icon is dimmed and cannot be selected.
The "change preferences" option gives access to several menu pages with preference options, which are explained in
4.
option
Navigate to...
Find alternative
Clear route
Add favourite
Change preferences
Plan from A to B
function
Calculates a route from your current position to a certain destination. The destination can be any
type of location except your current position. Enter the destination using the
menu.
The calculated route is shown in the
Note:
To calculate the route TomTom Navigator must have a valid GPS signal. If you do not have this,
the route summary screen
will be calculated when the signal becomes available. If necessary, refer to your installation poster
to find out how to connect your GPS device.
Related topic:
To learn more about the options to set a destination, see the
If you are not happy with the route TomTom Navigator has calculated you can recalculate a new
route. For detailed instructions see
The recalculated route is shown in the
Note:
Find alternative is not available when you have no route calculated.
The calculated route will be removed. The screen will show your position on the map without
providing route instructions or indicators.
Note:
Clear route is not available when you have no route calculated.
Add a location to your list of favourites. You can do this using any type of location except another
favourite. Enter the location using the
Related topic:
To learn more about the options to set a destination, see the
TomTom Navigator has many preferences which set the behaviour to your personal liking.
Chapter 4 describes all the options from the preference menu in detail.
To plan a route without a valid GPS signal. You can manually select the departure and destination
of your route. Chapter 3.1
main screen. There are two pages. Use the
route summary
is shown with the message "Waiting for a valid GPS signal..." The route
Chapter 3.2.
route summary
picking locations
describes this function in detail.
picking locations
screen, from which you can start navigating.
"Picking locations "
screen, from which you can start navigating.
menu.
"Picking locations "
button to cycle
chapter
description.
description.