Bosch 1617EVS User Manual page 71

BM 2610998756 09-11:BM 2610998756 09-11 9/22/11 8:03 AM Page 2
RA1054 BOSCH DELUXE ROUTER GUIDE
For use with Bosch 1613, 1615, 1617/18, 1619, and MR23EVS Series routers
I
K
L
Read and understand
WARNING
these instructions and tool
manual for use of these accessories.
Disconnect the plug from
WARNING
the power source before
making any adjustments, changing
accessories, or storing the tool. Such
preventive safety measures reduce the risk
of starting the tool accidentally.
ASSEMBLING FOR USE AS AN
EDGE GUIDE
To assemble the Deluxe Router Guide: (Fig. 1)
1. Attach the screws (A), washers (B) and nuts
(C) to the guide plates (D) as shown (Fig. 2).
Note: See "Attaching the Dust Extraction
Hood", on page 2, if you want to attach the
dust extraction hood.
2. Insert the assembled guide plates (D) into
the top of the guide base (E) and tighten.
3. Insert guide rods (F) into the outer holes of
guide base (E).
4. Tighten rods in place with front wing knobs
(G).
5. Place springs (H) over the ends of the rods.
6. Attach rear wing knobs (I) to fine adjustment
guide (J) and slide it over the rods.
G
H
E
J
F
D
7. Screw fine adjustment knob (K), spacer (not
shown) and indicator (L) through fine adjust
guide (J) and into guide base (E). While
assembling, the fine adjustment knob (K)
should be tightened to the point that the
springs H are slightly compressed between the
fine adjust base (J) and the guide base (E).
8. Tighten rear wing knobs (I).
C
E
-2-
FIG. 1
N
FIG. 2
D
B
A