Troubleshooting; Specifications - Honeywell HWDT-510W Owner's Manual

TROUBLESHOOTING

In case of problems, first turn off the hand dryer and disconnect from the source of electricity.
Symptom
Power indicator is not lit
Leaking
Not heating or cooling
NOTE: For all replacements and repairs, contact customer service at +1 855-687-2223

SPECIFICATIONS

Model
Voltage / Frequency
Heating Power / Cooling Power
Hot Tank Capacity / Cold Tank Capacity
Bottle Size
Temperatures
Cooling Type
Unit Dimensions (W x D x H)
Unit Weight
Certifications
Solutions
•
Make sure that the power switch is ON and the plug is connected to
the outlet correctly.
•
Check the water bottle, water pipe and faucet for damages. If broken
a replacement must be made.
•
Check the electrical connections and make sure they are not loose.
Repair the connections if damages are detected.
•
Replace the heating and cooling switches .
•
Replace the heating tank because it may be burnt out.
HWDT-510W
120V / 60 Hz
550W / 60W
4.7 L (1.2 gal.) per hour / 1.99 L (0.5 gal.) per hour
3 / 5 Gallon
Hot / Room / Cold
Electric
10.2"W x 9.8"D x 33.1"H
26.4 lbs.
cETLus, Energy Star, BPA-Free
7