Table of Contents
Advertisement
-TX-1080Z
9.FOR Z TYPE
9.1 DIFFERENCES BETWEEN THE Z/UC TYPE AND Z TYPE
_ Exactly the same parts are used to configure the Z type
and Z/UC
type. The difference between the Z type and
Z/UC
type is that the FM/AM
CHANNEL
STEP
switch (S500) is set to 100/10 kHz for the Z/UC type and to
50/9kHz for the Z type at the factory. Set the Z type to the
channel step for the area where used, as shown in the sche-
matic diagram below. (The Z/UC
type should be left at 100/
10kHz.)
® SCHEMATIC DIAGRAM
A
R555 47k
50/9 kHz
S500
_ CHANNEL STEP FM/AM
ASH1015
9.2 PACKING OF OPERATING INSTRUCTIONS
In some cases, the TX-1080Z/Z type is sold together
with the Model SA-1480/SD type, SD/G
type, SA-1280/
SD type and SD/G
type as a Combination system. Conse-
quently, the operating instructions include these models
and are packed with the Model SA-1480/SD type, SD/G
type, SA-1280/SD type and SD/G
type.
[_] FM/AM have 100/10kHz steps.
@ Parts List of Operating Instructions
(TX-10802Z/Z Type)
|
Part No. Model
|
|
ARB1070 Stereo Amplifier SA-1480/SD and SD/G types (English)
ARC1053
Stereo Amplifier SA-1480/SD type only (Spanish)
ARB1069
Stereo Amplifier SA-1280/SD and SD/G types (English)
ARC1052
Stereo Amplifier SA-1280/SD type only (Spanish)
Advertisement
Table of Contents
