Table of Contents
Advertisement
LO) el=e-litelal
Selecting the Shutter Speed
.
To select the desired shutter speed, set the SHUTTER switch in the
a) Normal position (factory setting)
corresponding position by turning it with a standard screwdriver.
b) FL (flickerless): Setting to prevent the picture from flickering on
50-Hz power supply
SHUTTER
c) FL (flickerless): Setting to prevent the picture from flickering on
af Oy ;
60-Hz power supply
10;
654
¢ It may not be possible to obtain an optimum picture using an
"Shutter speed (In seconds)
nied
automatic iris lens with the shutter set to CCD IRIS. If that is the
107A
107AP
case, select a fixed shutter speed (switch settings 0 through 6).
OFF (1/60)
OFF (1/50)
e When shooting under the light of fluorescent lamps on a 50-Hz
FL (1/100) ®)
FL (1/120) ©
(107A)/60-Hz (107AP) power supply, particularly at high shutter
1/250
speed or in the CCID IRIS mode, the picture may flicker. If that is
the case, set the shutter speed to FL.
1/1000
¢ When shooting under fluorescent light, etc., in CCD IRIS mode,
the color of the picture may be slow to change.
Should this occur, or when you have any other problem with
flicker, etc., set the CCD IRIS mode to OFF and use an automatic
iris lens.
1/2000
1/4000
1/10000
Backlight mode: This mode reduces
blackening when the light comes from
behind the subject.
Normal mode: Use this position
CCD
under normal conditions.
IRIS
aie
f
Spotlight mode: This mode reduces
white blooming when there is strong
light on the subject in front of a dark
background.
Advertisement
Table of Contents
