Contents 1 SAFETY AND HEALTH INFORMATION....................3 2 SET UP THE HEARING AIDS ......................8 3 HEARING AID AND APP CONTROLS ....................12 ........................12 SOFTWARE INSTALLATION 3.2 H ......................13 AGE DIRECTION FOR USE 3.2. C ........................15 ONNECT THE DEVICES 3.3 C ................
1 Safety and health information Intended use Indications for use Clinical data Hearing health care information Important safety instructions Warnings Cautions...
Page 4
Indications for use The JingHao hearing aids are intended to amplify sound for individuals 18 years of age or older with perceived mild to moderate hearing impairment. They are adjusted by the user to meet the user’s hearing needs. No pre-programming or hearing test is necessary. The device is intended for direct-to-consumer sale and use without the assistance of a hearing care professional.
Page 5
• Have sudden or rapid progression of hearing loss within the past 90 days in one or both ears. • Have acute or chronic dizziness, poor dexterity, poor vision, or significant dementia. • Suspect that you have significant ear wax accumulation or a foreign object in the ear canal.
Page 6
Please read and keep all safety and use instructions. Important safety instructions Only use attachments/componentsspecified by the manufacturer. The battery provided with this product may present a risk of chemical burn if mishandled. Please dispose of used batteries properly, following local regulations. Do NOT use the hearing aids without the supplied eartips attached.
Page 7
If this happens, remove and powr off the hearing aids immediately, then contact the jinghao Team. Visit: Jinghao.com • Do NOT make unauthorized alterations to this product. • If the battery leaks, do NOT allow the liquid to come in contact with the skin or eyes.
2 Set up the hearing aids How to apply domes Left & right hearing AIDS markings Volume adjustment Hearing mode change Replacing tubing How to use the charging case • 1.Volume Control / Turn ON/ Turn OFF • 2.Hearing Mode Change •...
Page 9
• WARNING: • It may be in few circumstances that the ear dome remain attached to the auditory meatus after the hearing aid is taken out. In that case, please ask a professional doctor to take the ear dome out. Do NOT deal with it yourself, you could easily cause further damage.
Page 10
* The hearing AIDS is designed with the memory function: The hearing AIDS can automatically record the previously tuned hearing mode. Hearing Mode Mode Sound you will hear when activated 1 beeps (“beep”) Quiet 2 beeps (“beep beep”) Social Noise Reduction 3 beeps (“beep beep beep”) 4 beeps (“beep beep beep beep”) Restaurant...
Page 11
See the adapter specifications for the power adapter specifications。 Plug the smaller end into the Micro USB port on the hearing AIDS charger case. · The charging case will charge via the USB port on the case. When the case is ·...
lower the volume and adjust the hearing AIDS within the ear. Also check to make sure you are wearing the best size ear domes to ensure a proper fit in the ear canal, as this may also induce some minor feedback if not snug in the ear.
If you would like a printed version of the user guide for a smart phone app, please consult customer support or go to our website. 3.2 HomePage direction for use Welcome to use Jinghao Hearing Aid and JH Smart APP. The following is the function...
Page 14
Description of the Home page each function module How to register for login: If you need to log in, please click the "Login/Register" button at the top of the "Me" tab page to enter the login page. If you have completed registration,please enter your user name in the "User Name" text box,enter your password in the password text box.
3.2. Connect the devices 1) Open the JH Smart APP and click "Connect Aids" or "Connect L" or "Connect R " on the Home page of the APP (Figure 1) to go to the "Bluetooth Devices" screen (Figure 2) . 2) Click "Scan"...
Page 16
Figure3 Figure 4 2. Disconnect the devices from the APP 1) On the homepage of APP, click "L Connected" or "R Connected" to enter the "Bluetooth Devices" screen (Figure 5) . 2) On each connected device, swipe to the left. You will see "Disconnect" appear next to the device (Figure 5) .
Page 17
♦Method 2 You can also select the desired program by scrolling through the large icons on the APP homepage (Figure 7) Figure 7 4. Volume Control 1) On the homepage of APP, move the red slider dot on the volume bar to increase or decrease the volume of the corresponding hearing aid (Figure 8) .
Figure 9 3.3 Connect the hearing aids and testing yourself Welcome to use Jinghao hearing aid and JH Smart Hearing APP. This app allows you to perform a complete hearing test with your compatible hearing aids. The APP will automatically configure the hearing aids based on the results of your hearing test.
Page 19
1) While situated in a quiet area, go to the "Testing" page of the APP. The APP will automatically detect the base noise level of the surrounding environment. If the ambient noise level is too high, the hearing test cannot be performed and the APP will not proceed to the next step.Please find a quiet environment to continue (Figure 3) .
Page 20
2) As shown in Figure 7, the left ear test is complete after eight different frequency tests. Click "Next" to enter the right ear hearing test page. Figure 6 Figure 7 5. Right ear hearing test 1) As shown in Figure 8, complete the right ear test as you did for the left. 2) After completing the eight frequency tests on the right ear, click "View Results"...
Figure 11 3.4 the "Enhancement" setting Welcome to use Jinghao hearing aid and JH Smart Hearing APP. The following describes the "Enhancement" setting of the APP which includes five functions: "Auto-Setting", "Noise Reduction", "Directional", "Equalizer" and "MPO".
Page 22
Figure 1 1. Auto-setting In the "Auto-setting" page, you can configure your hearing aids to a specific audiogram setting by swiping to and selecting a specific pre-saved audiogram. 1) After selecting the desired audiogram, press "One key configure" to enter the selected audiogram's Test Result display Click "One key configure"...
Page 23
3. Directional 1) On the "Directional" page, you can swipe the icon to select the appropriate Directional mode. 2) Then press "Configure" and the hearing aids will adjust to the selected directional mode configuration. Figure 6 4. Equalizer Note: The "Equalizer" function is for the professional persons to use. In order to avoid wrong operation, non-professionals please don't try.
Page 24
Figure 8 5) Click "Load" at the top right,you can select and load the "Equalizer" file that you saved to your phone. Figure 9 5. MPO 1) On the "MPO" page, select "Left Ear" or "Right Ear" to adjust the left or right ear hearing aid. 2) Select the small white ball on the MPO adjustment scale and slide it to the desired position and release it.
3.5 Save Data Files Welcome to use Jinghao hearing aid and JH Smart Hearing APP. The following is the description of the functions of "Profile" in this APP, including three functional modules: "Save Data Files", "Help" and "Settings". Figure 1 1.
Page 26
Figure 3 2. Help In the "Help" section, you will find operating instructions of the APP and hearing aids. 3. Seting The "Seting" section contains four parts: "My Devices", "Language Settings", "Version Update" and "About". 1). My Devices As shown in Figure 4, on the "My Devices" page, you can view the device information, or perform operations such as "Find The Device"...
Page 27
After you find the hearing aid, please click the "Found,Stop Beep" button in the app or restart the hearing aid. The hearing aid will stop beep and return to normal state. 1.3). Factory Reset As shown in Figure 4, if you need to reset the hearing aid to the factory state, please click the "Factory Reset"...
4 Care and maintenance MAINTENANCE AND CLEANING Daily maintenance It is important to keep your devices clean and dry. On a daily basis, wipe them clean using a soft cloth or tissue. To avoid potential damage from excess humidity or perspiration, the use of a drying kit is also recommended.
Page 29
Keep lid closed as much as possible to avoid dust and debris build up. -Store your charger in a clean and dry location, i.e. a dresser or shelf rather than the bathroom or kitchen. To ensure the longest life of your rechargeable hearing ampli- fiers batteries and the batteries in the charger: Fully charge hearing AIDS batteries every night.
5 Troubleshooting POSSIBLE CAUSES SYMPTOM SOLUTIONS Connect the hearing AIDS to the charging case Battery fully for charging discharged Increase volume if volume control available Volume too low Place charging the hearing AIDS until the Device is not charged indicator is lighted in green color No Sound Microphones are Clean out any debris from the mic holes...
Page 31
Charger not hearing AIDS placed in Connect charger to external power supply connected to power source charging inserts Wait five hours after placing hearing AIDS in Battery fully charger,regardless of LED discharged behavior Battery fully Connect USB cable to charge Hearing AIDS indicator discharged Clean the contacts of the hearing AIDS and the...
6 Regulatory and legal information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 33
Overall with cable: 33 mm long x 23 mm wide x 18 mm thick Overall without cable: 30 mm long x 14 mm wide x 8 mm thick Disposal: The JingHao hearing aids and components are electronic components which should be discarded in accordance with national, regional, and local regulations.
Page 34
Emissions Test IEC60601 Compliance Level Electromagnetic Environment Guidance Test Level The hearing aid uses RF energy only for its internal function.Therefore, its RF emissions are very low and are not likely RF emissions CISPR 11 Group 1 Group 1 to cause any interference in nearby elec tronic equipment.
Page 35
The serial numbers are located on the bottom of each hearing aid. Serial number: Model number: BMD0012 Please keep your receipt with this document. Now is a good time to register your JingHao product. You can easily do this by going to JingHao.com...
Page 36
Proper operation of your Jinghao product requires a safe, private,and secure operating environment. To ensure your security, Jinghao recommends following best practices for securing your home network and mobile device. For more information, refer to the US Federal Trade Commission’s guidance on online security.Visit: jinghao.com The Privacy Policy is available at jinghao.com...
Need help?
Do you have a question about the JH-W3 and is the answer not in the manual?
Questions and answers