1. Manuals
  2. Brands
  3. Niveo Professional Manuals
  4. Wireless Access Point
  5. NWA200
  6. Manual

Niveo Professional NWA200 Manual

N-wall 300n poe acces point
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MANUAL NWA200
Niveo Professional In-Wall 300N PoE Acces Point
i

Advertisement

Table of Contents
loading

Related Manuals for Niveo Professional NWA200

Summary of Contents for Niveo Professional NWA200

  • Page 1 MANUAL NWA200 Niveo Professional In-Wall 300N PoE Acces Point...
  • Page 2 Copyright Statement is the registered trademark of Netstar Products BV. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Netstar Products BV. No part of this publication can be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the prior written permission of Netstar Products BV.
  • Page 3 Disclaimer Pictures, images and product specifications herein are for references only. To improve internal design, operational function, and/or reliability, Netstar Products BV reserves the right to make changes to the products described in this document without obligation to notify any person or organization of such revisions or changes. Netstar Products BV does not assume any liability that may occur due to the use or application of, the product or circuit layout(s) described herein.

  • Page 4: About This User Guide

    About This User Guide Please read this user guide before you start! This user guide instructs you to install and configure the device. This user guide uses the following formats to highlight special messages: Icon Description This format is used to highlight information of importance or special interest.

  • Page 5: Table Of Contents

    Table of Contents ABOUT THIS USER GUIDE ........................IV I PRODUCT OVERVIEW ........................- 1 - ........................... - 1 - ..........................- 1 - ACKAGE ONTENT 3 LED ..............................- 2 - & I ......................... - 2 - UTTON NTERFACE ...............................
  • Page 6 5.3 Channel Scan ........................- 20 - 5.4 Advanced Settings ........................ - 20 - 5.5 Access Control ........................- 21 - 5.6 QVLAN ..........................- 22 - 6 SNMP ............................- 23 - ............................- 23 - OOLS 7.1 Maintenance ........................- 24 - 7.2 Time &...

  • Page 7: I Product Overview

    I Product Overview 1 What It Does The NWA200 is a best-in-class 802.11n indoor access point designed specifically for business-class environments such as hotels, airports, coffee shops, shopping centers, sporting venues, and university campus. With standard install design and stylish appearance, it nicely fits into an 86-type wall jack and seamlessly blends in with most interior decorations in an office or room.

  • Page 8: Led

    3 LED Color Status Description Solid The device is connected to power supply. Blinking The device is functioning correctly. Green Power is not supplied to the device or the device is malfunctioning. 4 Button & Interface ❶ ReSeT: Open the housing of the AP and press this reset button for 7 seconds to restore the device to the factory default settings.

  • Page 9: Label

    LAN: 100M Ethernet Port for connecting to an Ethernet LAN device such as a PC or switch, etc. This port support “Bypass”. Client connected to the device’s LAN port can still communicate with the remote uplink device (PoE switch) even when no power is supplied. Green Connector: For connecting to a 4-core phone cable.

  • Page 10: Ⅱ Install

    Ⅱ Install Remove the cover of the device. Install and power the device (Connect one end of an Ethernet cable to the PoE switch and the other end to the Ethernet port on the back panel of the device; connect the phone cable to the green connector).
  • Page 11 Make sure all connections are established correctly as seen in the diagram. - 5 -...

  • Page 12: Ⅲ Login

    Ⅲ Login 1 Configure PC TCP/IP Settings Connect your PC to this device wirelessly or using an Ethernet cable. The default IP address of your wireless access point is 192.168.2.200. If you are using the default IP subnet, the computer you are using to connect to the device should be configured with an IP address that starts with 192.168.2.x (where x can be any number between 2~253) and a Subnet Mask of 255.255.255.0;...
  • Page 13 You will now enter the web configuration interface as seen below. - 7 -...

  • Page 14: Ⅳ Features & Configurations

    Ⅳ Features & Configurations 1 Status This section includes the following: 1.1 System Status: View the device’s system information and LAN settings. 1.2 Wireless Status: View the device’s wireless information and current SSID settings. 1.3 Traffic Statistics: View current traffic statistics of each SSID. 1.4 Wireless Clients: View the MAC addresses and connection speed of the wireless clients that currently connect to each SSID.

  • Page 15: Traffic Statistics

    1.3 Traffic Statistics Click Status -> Traffic Statistics and you can view current traffic statistics of the device's SSID. 1.4 Wireless Clients Click Status -> Wireless Clients and you can view the MAC addresses and connection speed of the wireless clients that currently connect to each SSID. To view wireless clients connected to a specific SSID, simply select it from the drop-down list on the screen.

  • Page 16: Quick Set Up

    APs actively. WDS Mode: In this mode, this device can provide access to at most 4 APs. Universal Repeater Mode (AP Client Mode): In this mode, NWA200 negotiates with the uplinked AP successfully and also provides access to lower clients.

  • Page 17: Lan Settings

    3 LAN Settings Here you can configure the device's LAN IP address for Internet access. This IP address is also to be used to access the device’s settings through a web browser. Most of the default settings work in most cases. However, if your access point is part of a more complex LAN network, then modify the settings to meet the requirements of your network based on the explanation of the various fields.

  • Page 18: Dhcp Server

    4 DHCP Server This section includes the following: 4.1. DHCP Server: Configure DHCP server settings. 4.2 DHCP Client List: View the information of the DHCP clients that currently obtain IP addresses from the DHCP server. 4.1. DHCP Server DHCP (Dynamic Host Configuration Protocol) assigns an IP address to each device on the LAN/private network.

  • Page 19: Dhcp Client List

    subnet. Set the gateway address to the LAN IP address of the remote device. Configure correct DNS settings. If a wrong DNS server address is entered, Web pages may not be open. Note If there is already an active DHCP server on your network, make sure the IP address pool you specified here is not a part of that existing DHCP server.

  • Page 20: Basic Settings

    5.5 Access Control: Specify a list of devices to allow or disallow a connection to your wireless network via the device's MAC addresses. 5.6 QVLAN: Here you can configure the QVLAN feature to better manage wireless traffic and enhance wireless security. 5.1 Basic Settings Here you can configure the basic wireless settings of the device such as the SSID (name of the network) and security.
  • Page 21 WEP (Wired Equivalent Privacy): WEP is a security algorithm for IEEE 802.11 wireless networks. Introduced as part of the original 802.11 standard, its intention was to provide data confidentiality comparable to that of a traditional wired network. Wireless speed can reach up to 54Mbps if WEP is used.
  • Page 22 Default Key: Specify a WEP key from the preset keys for current use. For example, if you select Key 2, wireless clients must join your wireless network using this Key 2. WEP-802.1x Configuration Procedures: SSID: This is the public name of your wireless network. Select the SSID you wish to configure from the drop-down list.
  • Page 23 Security Mode: Supports WPA-PSK, WPA2-PSK and WPA/WPA2-PSK Mixed. WPA-PSK: Supports AES and TKIP cipher types. WPA2-PSK: Supports AES, TKIP and TKIP+AES cipher types. WPA/WPA2-PSK mixed: If selected, both WPA-PSK and WPA2-PSK secured wireless clients can join your wireless network. Cipher Type: Includes AES, TKIP and TKIP&AES. AES: If selected, wireless speed can reach up to 300Mbps.

  • Page 24: Radio

    With 802.1X authentication, the supplicant provides credentials, such as user name/password or digital certificate, to the authenticator, and the authenticator forwards the credentials to the authentication server for verification. If the authentication server determines the credentials are valid, the supplicant (client device) is allowed to access resources located on the protected side of the network.
  • Page 25 Enable Wireless: Enable or disable the wireless feature. Network Mode: Select a correct mode according to your wireless clients. The default is 11b/g/n mixed. 11b: This network mode delivers wireless speed up to 11Mbps and is only compatible with 11b wireless clients. 11g: This network mode delivers wireless speed up to 54Mbps and is only compatible with 11g wireless clients.

  • Page 26: Channel Scan

    5.3 Channel Scan Here you can scan current wireless signals. 5.4 Advanced Settings Here you can configure the advanced wireless settings including AP Isolation, Beacon interval, Fragment threshold, RTS threshold and DTIM interval, etc, for your wireless networks. Normally, the default settings will work. If not, change them according to the suggestions given by your ISP or our technical staff.

  • Page 27: Access Control

    Fragment Threshold: Specify a Fragment Threshold value. Any wireless packet exceeding the preset value will be divided into several fragments before transmission. The valid value range is between 256~2346. RTS Threshold: If a packet exceeds the set value, RTS/CTS scheme will be used to reduce collisions.

  • Page 28: Qvlan

    MAC Filter: There are three options available: Disable, Deny and Allow. Disable: Disable the access control feature. Allow: Allow only devices at specified MAC addresses to join your wireless network. Deny: Blocks only devices at specified MAC addresses from joining your wireless network.

  • Page 29: Snmp

    Step2: Configure a VLAN ID for a corresponding SSID. 6 SNMP The NWA200 can be managed from SNMP management utility. Click SNMP to enter the configuration screen. Here you can configure the SNMP settings. Configuration Procedures: SNMP: Select Enable to enable the SNMP proxy feature.

  • Page 30: Maintenance

    7.3 Logs: View the history of the device’s actions, log events and simultaneously send them to the specified log server. 7.4 Configuration: Explains how to save, restore configurations as well as restore factory defaults. 7.5 User Name & Password: Explains how to change login user name and password. 7.6 Diagnostics: Explains how to locate a network failure.

  • Page 31: Time & Date

    Note Do NOT disconnect the device from power supply when uploading software to the device. If the power supply is interrupted, the upload may fail, corrupt the software, and render the device inoperable. When the upload completes, your wireless access point will automatically restart.

  • Page 32: Logs

    To set time and date manually: Disable Sync with Internet time servers. Specify the time and date manually or click Sync with Your PC to automatically copy your PC's time to the device. And then go to Status to make sure the system time is correctly updated. Web Login Timeout Click Tools ->...

  • Page 33: Configuration

    There are three types of logs are available: All, system and LAN. To view a specific type of log, simply select it from the View Log Levels drop-down list. Log Setup Click Tools -> Log Setup to configure the system Log options. You can set the maximum number of logs that can be displayed and configure the log server settings.
  • Page 34 Configuration Procedures: Click Backup. Click Save on the File Download window and select a hard drive to save the file. Do include the file name suffix of ".cfg" when renaming the file name to avoid problems. Configuration Procedures: Click Browse. Select and load the configuration file that is saved previously to your local hard drive and click the Restore button.

  • Page 35: User Name & Password

    Method 1: To restore factory default using UI: Click the Restore to Factory Default button and wait until the progress indicator displays 100% completed. Method 2: To restore factory default by pressing the hardware reset button: Remove the cover of the device. Press the RST button with a needle for about 7 seconds.

  • Page 36: Diagnostics

     Administrator: If you log in to the device as an administrator, you have all available rights to access the device.  User: If you log in to the device as a user, you can only view configurations instead of configuring or changing any existing configurations.
  • Page 37 Reboot For some settings to be effective, a reboot is required. All connections will be lost while rebooting. Click Tools -> Reboot to enter the configuration screen. Time Reboot: here you schedule a time to do a reboot - 31 -...

  • Page 38: Led

    7.8 LED Here you can turn on / off all LED lights - 32 -...

  • Page 39: Ⅴappendix

    ⅤAppendix 1 Configure PC TCP/IP Settings Windows XP 1. Click Start -> Settings -> Control Panel. 2.Click Network Connections. - 33 -...
  • Page 40 3.Right click Local Area Connection， click Properties, select Internet Protocol (TCP/IP) on the appearing window and then click Properties. - 34 -...
  • Page 41 4. Select Use the following IP address and configure as below: IP address: 192.168.2.x (where x can be any number between 2~253) Subnet Mask: 255.255.255.0. 5. Click OK twice to exit. - 35 -...

  • Page 42: Windows 7

    Windows 7/8 1. Click on Start > Control Panel > Network and Internet > Network and Sharing Center. 2. Click Change adapter settings. 3. Right-click on the Local Area Connection and select Properties. 4. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties or directly - 36 -...
  • Page 43 double-click on Internet Protocol Version 4 (TCP/IPv4). 5. Select Use the following IP address. - 37 -...
  • Page 44 IP address: Enter 192.168.2.xxx where xxx can be any number between 2~253. Subnet mask: Enter 255.255.255.0 Click OK twice to save your settings. - 38 -...

  • Page 45: Factory Default Settings & Specifications

    2 Factory Default Settings & Specifications Default Settings Item Default Settings Login IP Address 192.168.2.200 Login Login User Name admin Login Password admin IP Address 192.168.2.200 Subnet Mask 255.255.255.0 Settings DHCP Server Disabled （LAN） IP Pool 192.168.2.100~192.168.2.199 Wireless Enabled Network Mode 11b/g/n mixed Channel| Channel Bandwidth Auto|20/40|Auto...
  • Page 46 Long Preamble Wireless Security Disabled Wireless Access Control Disabled SNMP Disabled Administrator Name: Administrator Device Name: NWA200 SNMP Location: Shenzhen Read Community String: public Write/Read Community String: private Sync with Internet Time Servers Tools System Time Time Zone: (GMT-5:00)New York...

  • Page 47: Safety And Emission Statement

    3 Safety and Emission Statement CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This device complies with EU 1999/5/EC. NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
  • Page 48 Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Table of Contents