Related Manuals for Niveo Professional NRS-AP10
Summary of Contents for Niveo Professional NRS-AP10
- Page 1 NRS-AP10 750Mbps Dual-Radio Ultra Wide Range Wireless Access Point NRS-RC1 4-port Smart router/controller PoE+ Gigabit Switch User Manual Version 2.2...
- Page 2 This manual is subject to tell users how to use this CAPWAP Broad Band Router with WLAN Controller and PoE Switch function, suit for those familiar with basic networking knowledge and terminology, Then this user manual including the product main features, packing content, hardware introduce and AC Controller, Routing, Firewall, Management.
-
Page 3: Table Of Contents
Table of Contents Table of Contents Chapter 1: Product Instruction, Default Data, Packing-------------------------------------------------------5 1.1 Product Instruction ---------------------------------------------------------------------------------------------------6 1.2 Default Data---------------------------------------------------------------------------------------------------------------7 1.3 Packing and Accessory----------------------------------------------------------------------------------------------7 Chapter 2: Hardware Introduce---------------------------------------------------------------------------------------------8 2.1 Hardware-------------------------------------------------------------------------------------------------------------------9 2.2 Installation----------------------------------------------------------------------------------------------------------------9 Chapter 3: Login -------------------------------------------------------------------------------------------------------------------10 Chapter 4: WEB GUI Configuration--------------------------------------------------------------------------------------12 4. - Page 4 Table of Contents 4.9.4.5 Device Time--------------------------------------------------------------------------------------34 4.9.4.6. Device Log---------------------------------------------------------------------------------------34 User Manual | 4...
-
Page 5: Chapter 1: Product Instruction, Default Data, Packing
User Manual NRS-AP10 and NRS-RC1 Chapter 1: Product Instruction, Default Data, Packing Product Instruction Default Data Packing User Manual | 5... -
Page 6: Product Instruction
User Manual NRS-AP10 and NRS-RC1 1.1. Product Instruction MR series broad band router is an CAPWAP home use router with WLAN Controller and PoE switch functions. Build in network/electronic distribution box, it supply Ethernet for PC, IPTV or other entertainment device, then supply PoE power and Ethernet together for in wall wireless AP to bring seamless wireless coverage for each corner.The working diagram showed as follow:... -
Page 7: Default Data
User Manual NRS-AP10 and NRS-RC1 1.2 Default Data: Management IP address & LAN IP address: 192.168.18.1 Login Password: admin 1.3 Packing and Accessory Broad Band Router Power Adapter (26W or 72W) Power Cord User Manual User Manual | 7... -
Page 8: Chapter 2: Hardware Introduce
User Manual NRS-AP10 and NRS-RC1 Chapter 2: Hardware Introduce Hardware Installation User Manual | 8... -
Page 9: Hardware
User Manual NRS-AP10 and NRS-RC1 2.1 Hardware WAN: Ethernet Port, connect with ADSL Modem mainly. DC Input: Can be 48V or 24V, we take 48V for example; Pls note: If 48V DC input, then the PoE ports can supply 48V PoE out for PD equipment. If 24V DC Input, then the PoE ports support passive PoE, supply 24V Passive PoE for PD equipment. -
Page 10: Chapter 3: Login
User Manual NRS-AP10 and NRS-RC1 Chapter 3: Login User Manual | 10... - Page 11 User Manual NRS-AP10 and NRS-RC1 Chapter 3: Login A. Confirm the PoE ports is 48V PoE or 24V Passive PoE; If 24V Passive PoE, pls disable PoE power first by the PoE on/off switch, then connect LAN ports with PC.
-
Page 12: Chapter 4: Web Gui Configuration
User Manual NRS-AP10 and NRS-RC1 Chapter 4: WEB GUI Configuration User Manager AC LAN Settings WAN URL Filter Behaviour Control Timed Reboot Upgrade Firmware Advanced Settings User Manual | 12... - Page 13 User Manual NRS-AP10 and NRS-RC1 Chapter 4: WEB GUI Configuration When login this broad band router, the following home page will pop up as follow: Version: Show firmware version : Exist this GUI WEB : To manage the online users, click it to user manager page...
-
Page 14: User Manager
User Manual NRS-AP10 and NRS-RC1 4. 1. User Manager In user manager, can manage the network behavior of family members and visitors. Add: Add the MAC which will be managed, configuration showed in above picture. Blacklist Manager: Mean add the MAC address into black name, prohibit it Ethernet behavior, configuration showed as following picture;... -
Page 15: Device List
User Manual NRS-AP10 and NRS-RC1 4. 2. AC This broad band router with WLAN controller function, which can manage, control and configure the connected in wall wireless access point Click button of AC, it will pop up following picture, which showed all the wireless AP connected into this broad band router;... - Page 16 User Manual NRS-AP10 and NRS-RC1 WLAN Users: Show QTY of end users which access into wireless AP. Batch Set: Set Channel, TX Power, Time to restart, Max users, device login password in batch. Delete: Delete the chosen wireless AP from this device list.
-
Page 17: 2: Address Server
User Manual NRS-AP10 and NRS-RC1 4.2.2: Address Server: Address Server: Mean this AC controller can assign IP address for wireless AP automatic, no need to change wireless AP’s IP address one by one Refresh: to refresh the wireless AP’s IP address Function: Enable/Disable, default is Enable Server IP address: default is 192.168.200.1;... - Page 18 User Manual NRS-AP10 and NRS-RC1 Wireless Basic: to setup wireless AP’s SSID, password, Tag VLAN Device List: Wlan Device 1 and Wlan Device 2; Wlan Device 1 mean 2.4G Radio mainly; Wlan Device 2 mean 2.4G or 5.8G radio, based on wireless AP.
- Page 19 User Manual NRS-AP10 and NRS-RC1 Channel: Auto in default, but recommend to setup channel by manual based on environment. RF Output Power: 100%, 75%, 50%, 25%, 12.5%, can adjust it based on application. More RF Power, mean more WiFi Range;...
-
Page 20: 4: Device Log
User Manual NRS-AP10 and NRS-RC1 Delete: If need, can delete this zero config. 4.2.4: Device Log Device Log is keeping the operation record of this WLAN controller. User Manual | 20... -
Page 21: Lan Settings
User Manual NRS-AP10 and NRS-RC1 4.3 LAN Settings This including LAN setting and Static DHCP 4.3.1 LAN Setting: IP address: mean AC controller’s IP address Subnet Mask: to set the subnet of LAN STP: Spanning Tree: Enable to show the assigned IP list in DHCP list; Disable mean will not show it. -
Page 22: Wan
User Manual NRS-AP10 and NRS-RC1 4.4. WAN For the MR series product, the default operation mode is gateway. 4.4.1 WAN Setting: In WAN Setting, including DHCP, Static IP, PPPoE, showed as following picture: Static IP: Assign IP address and DNS information to get the Ethernet PPPoE: Dial up the PPPoE number to get the Ethernet DHCP: Get Ethernet from router’s DHCP. -
Page 23: Advanced Setting
User Manual NRS-AP10 and NRS-RC1 4.4.2 Advanced Setting: In Advanced Setting, mainly to show MAC Clone and Remote Management MAC Clone: When enable it, can scan the connected device’s MAC address, choose the MAC address needed to be cloned, then apply; Or can input the indicated MAC to clone. -
Page 24: Behaviour Control
User Manual NRS-AP10 and NRS-RC1 4.6 Behavior Control In behavior part, it allow/reject end users some behavior based on rules. Status: Enable or Disable IP Group: Can add the IP group if need based on following picture User Manual | 24... - Page 25 User Manual NRS-AP10 and NRS-RC1 Time Group: Can add time group based on requirement in following picture: Application Class: Including Instant messaging (QQ, Trade Manager, WeChat); Network Download (Thunder, BT, Edonkey); Network Video (Youtube, PPTV, Tencent Video, Ppstream, Youku, Sohu Video, Letv, RSTP, Douyu, Storm...
-
Page 26: Timed Reboot
User Manual NRS-AP10 and NRS-RC1 4.7 Timed Reboot In this part, it show the auto reboot time; The default setting is disable, when enable it, it can reboot everyday. 4.8 Upgrade Firmware This feature allows the device firmware upgrade. Noted:Upgrading software may cause system outage, In the process of upgrading the firmware, do not... -
Page 27: Advanced Settings
User Manual NRS-AP10 and NRS-RC1 4.9 Advanced Settings In advanced Settings, it including the common broadband router setting ; Network setting, Security setting and Device setting. 4.9.1 Common 4.9.1.1: AC Setting: For this part, pls refer to Chapter 4, 4.2 AC Part. -
Page 28: Network
User Manual NRS-AP10 and NRS-RC1 4.9.2 Network In Network part, including LAN Settings, WAN Settings and DDNS settings. 4.9.2.1: LAN Settings: For this part, pls refer to Chapter 4, 4.3 LAN 4.9.2.2: WAN Settings: For this part, pls refer to Chapter 4, 4.4 WAN... -
Page 29: 3: Ddns
User Manual NRS-AP10 and NRS-RC1 4.9.2.3: DDNS: DDNS or Dynamic DNS, is a method of automatically updating a name server in the Domain Name System(DNS), often in real time, with the active DDNS configuration of its configured hostname, address or other information. -
Page 30: Ip Filter
User Manual NRS-AP10 and NRS-RC1 4.9.3.2 IP Filter When enable this function, router will allow or limited this IP address to access into this broadband router based on rules. 4.9.3.3 MAC Filter When enable MAC filter, router will allow or prohibit this MAC address to access into this router based on rules. -
Page 31: Port Mapping
User Manual NRS-AP10 and NRS-RC1 4.9.3.4 Port Mapping Port forwarding: called port forwarding also, it an application of network address translation(NAT) that redirects a communication request from one address and port number combination to another while the packets are traversing a network gateway, such as a router or firewall... -
Page 32: Dmz
User Manual NRS-AP10 and NRS-RC1 4.9.3.5 DMZ DMZ or Demilitarized Zone is a physical or logical subnetwork that contains an exposes an organization’s external-facing service to a usually larger and untrusted network, usually the Internet. The purpose of a DMZ is to add an additional layer of security to an organization’s local area network, an external network node can access only what is exposed in the DMZ, while the rest of organization’s network is firewall. -
Page 33: Reboot
User Manual NRS-AP10 and NRS-RC1 Restore Using the saved configuration file to recovery configuration Restore default Restore the factory default settings, please press this button 4.9.4.2 Reboot In this part, mainly to reboot the broadband router now or reboot this broadband router in certain time 4.9.4.3 Modify Password... - Page 34 User Manual NRS-AP10 and NRS-RC1 4.9.4.5 Device Time To show the broadband router’s time. Sync with the host Synchronization time with connected PC and router NTP Eable Enable or Disable NTP NTP Server Select the server time synchronization Manual IP Setting...
- Page 35 User Manual NRS-AP10 and NRS-RC1 Device Log Enable or Disable to show system log Remote Log Service To decide whether send System log into some pointed remote server synchronously; User Manual | 35...