Dual phase single 50a dc/dc umodule regulator (8 pages)
Summary of Contents for Linear Technology DC2087A
Page 1
We have 45,000 LP502030-PCM-NTC-LD-A02554 - EEMB - Lithium Battery Rectangular 3.7V 250mAh Rechargeable in stock now. Starting at $0.034. This EEMB part is fully warrantied and traceable. 00000005981LF-000 DC2087A EOS Power ANALOG DEVICES Buy Now Buy Now Looking for a discount?
GUI software LTpowerPlay™ onto your PC and use LTC’s L, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks C/SMBus/PMBus dongle DC1613A to connect to the and LTpowerPlay is a trademark of Linear Technology Corporation. All other trademarks are the property of their respective owners.
2. Connect the 1.0V output load between VOUT and GND (Initial load: no load). Connecting a PC to DC2087A 3. Connect the DVMs to the input and outputs. Set default You can use a PC to reconfigure the power management jumper position: JP1: ON.
You can use LTpowerPlay to board. The software also provides an automatic update evaluate Linear Technology ICs by connecting to a demo feature to keep the software current with the latest set board system. LTpowerPlay can also be used in an offline of device drivers and documentation.
Page 7
1. Download and install the LTPowerPlay GUI: http://www.linear.com/ltpowerplay 2. Launch the LTpowerPlay GUI. a. The GUI should automatically identify the DC2087A. The system tree on the left hand side should look like this: Then, click the “W” (PC to RAM) icon to write these register b.
Information furnished by Linear Technology Corporation is believed to be accurate and reliable. However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa- tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.
Page 11
Linear Technology Corporation (LTC) provides the enclosed product(s) under the following AS IS conditions: This demonstration board (DEMO BOARD) kit being sold or provided by Linear Technology is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES ONLY and is not provided by LTC for commercial use. As such, the DEMO BOARD herein may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including but not limited to product safety measures typically found in finished commercial goods.
Need help?
Do you have a question about the DC2087A and is the answer not in the manual?
Questions and answers