Sealey LED445 Instructions

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instructions
1. sAfety
1.1. General
do not shine directly into your, another person's or an animal's eyes.
8
do not allow children to use the torch.
8
do not use the torch if you suspect that the battery or the torch casing is damaged.
8
do not leave batteries in a discharged state. Before storage remove batteries and dispose of in the correct manor.
8
1.2. battery safety
wArninG! To reduce the risk of burns or fire:
‰
do not attempt to open the batteries.
8
do not crush, puncture, short contacts or dispose of in fire or water.
8
do not expose to temperatures above 60°c (140°).
8
replace only with the batteries designed for this product.
recycle or dispose of used batteries as stipulated by local regulation.
if the electrolyte in the batteries gets on your skin, thoroughly wash with soap and water. if it gets in your eyes, rinse thoroughly with
cool water and seek immediate medical attention.
2. introduction
single 3W XPe cree led produces extreemely bright, white light with an output of 150lumens and a working range up to 100 metres. focus
type can be changed from spotlight to wide area by twist/slide action of the head. lightweight aluminium housing. two function on/off push
button for full and 30% energy saving mode. Powered by 2xAA batteries.(batteries not included)
3. specificAtion
model no: ................................................................. led445
led: ...............................................................3W XPe cree
lumen out (high/low): ..........................................150lm/45lm
Battery .................................................. 2 x AA (not included)
Working range: .......................................................... 100mtr
twist/slide head
© Jack sealey limited
instructions for
Aluminium torch 3w xpe cree led
AdjustAble focus 2 x AA cell
led445
model no:
Original Language Version
on/mode change/off
Button
Battery compartment
screw cap
led445 | issue 1 27/05/16
fig.1