Download Print this page
Sealey LED450 Quick Start Manual

Sealey LED450 Quick Start Manual

Rechargeable aluminium torch ; 20w cree xhp50 usb

Advertisement

Quick Links

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. saFetY
1.1.
general saFetY
Do not shine directly into your, another person's or an animal's eyes.
8
Do not allow children to use the torch.
8
Do not use the torch if you suspect that the battery or the torch casing is damaged.
8
Do not leave batteries in a discharged state. Before storage remove batteries and dispose of in the correct manner.
8
1.2.
batterY saFetY
warning! To reduce the risk of burns or fire:
Do not attempt to open the batteries.
8
Do not crush, puncture, short contacts or dispose of in fire or water.
8
Do not expose to temperatures above 60°C (140°).
8
Replace only with the batteries designed for this product.
9
Recycle or dispose of used batteries as stipulated by local regulation.
9
If the electrolyte in the batteries gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with
9
cool water and seek immediate medical attention.
2. introDuction
Produces extremely bright white light with an output of 2000 lumen and a working range of up to 500 metres. Slide action head adjusts
focus from spotlight to wide beam. Two function on/off push button for full and 30% modes. lightweight aluminium housing. Powered by 2
x rechargeable lithium-ion 3.7V 2Ah batteries. Supplied with micro USB charging lead.
3. speciFication
model no: .................................................................. led450
Battery ............................... 2 x rechargeable 7.4V 2Ah li-ion
Charging time ..............................................................4.5-5hr
led's. ............................................................ 1 x 20W CRee
lumen output ............................................................. 2000lm
operating time ..................................................................3hr
net weight ................................................................... 415gm
important warrantY inFormation
The batteries fitted to this lamp are considered to be consumable items and their ability to accept a charge will reduce over time.
We will provide warranty against mechanical and electrical defect for a period of one year - this Does not cover fair wear and tear.
If the batteries are not properly charged before first use, or regularly conditioned, their capacity will diminish. Under these
circumstances we will not replace the battery regardless of whether it is less than one year old.
© Jack Sealey limited
rechargeable aluminium torch
20w cree Xhp50 usb
leD450
model no:
Original Language Version
led450
Issue 4 (3) 23/11/18

Advertisement

loading

Summary of Contents for Sealey LED450

  • Page 1 IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500 batterY removal Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey ltd’s Batteries Producer Registration number (BPRn) is BPRn00705.