Table of Contents
Advertisement
Quick Links
To aid reporting in case of loss or theft, please record the unit's model and serial numbers in the space provided. The numbers
are located at the rear of the unit.
PRECAUTIONS
WARNING:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
1.
Do not attempt to open the cabinet. There are no user
serviceable parts inside. Refer all servicing to qualified service
personnel.
2.
Slots and openings in the cabinet and the sides or bottom
are provided for ventilation. To ensure reliable operation
and to protect the unit from overheating, these openings
must not be blocked or covered. Avoid installation in
enclosed spaces such as bookcases unless proper
ventilation is provided.
3.
Keep the unit away from radiators and other heat sources.
4.
Do not push objects of any kind into the unit through the
cabinet slots or openings as they could touch electrically
live parts or short circuit parts resulting in a fire or electric
shock.
5.
To prevent fire or shock hazard, do not expose this unit to
dripping or splashing, no objects filled with liquids, such as
vases, should be placed on the unit.
6.
Use the unit on a horizontal (flat) surface only.
7.
Do not place any combustible objects on the unit
(candles, etc.).
Do not place the unit on the furniture that is capable of being tilted by a child or an adult leaning, pulling, standing or
climbing on it. A falling unit can cause serious injury or even death.
POWER SUPPLY
The main power supply is engaged when the main plug is plugged in a 220-240 V~, 50 Hz AC outlet. To operate the unit,
press Q (power) to turn on the unit.
WARNING: LIVE PARTS INSIDE. DO NOT REMOVE ANY SCREWS.
WARNING: To prevent the spread of fire, keep candles
2
EN
Model number:_________________
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
or other open flames away from this
product at all times
Serial number:_________________
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the apparatus's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the apparatus.
8.
The LCD panel used in this unit is made of glass. Therefore,
it can break when the unit is dropped or applied with
impact. Be careful not to be injured by broken glass pieces
in case the LCD panel breaks. The LCD panel is a very high
technology product with 921,600 thin film transistors,
giving you fine picture details. Occasionally, a few non-active
pixels may appear on the TV screen as a fixed point of
blue, green or red. Please note that this does not affect the
performance of your unit.
9.
Disconnect the mains plug to switch off when the unit
becomes faulty or not in use.
10.
The mains plug shall remain readily operable.
11.
Read the manual instructions to ensure correct and safe
installation and interconnection of the unit in multimedia
systems.
12.
Keep a distance of 20 cm around the ventilation openings
of the unit.
13.
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FUNAI LED22H800
Summary of Contents for FUNAI LED22H800
-
Page 1: Precautions
To aid reporting in case of loss or theft, please record the unit’s model and serial numbers in the space provided. The numbers are located at the rear of the unit. Model number:_________________ Serial number:_________________ PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. -
Page 2: Table Of Contents
INTRODUCTION Contents A Note about Recycling PRECAUTIONS............... 2 This unit's packaging materials are recyclable INTRODUCTION............3 and can be reused. Please dispose of any Supplied Accessories..............4 materials in accordance with your local recycling regulations. Symbols Used in this Manual............. 4 This product consists of materials which can Attaching the Base................ -
Page 3: Supplied Accessories
Supplied Accessories Fixing the Unit on Your Furniture • Remote Control • Batteries (R03/AAA, 1.5V x 2) Screw this unit on your furniture tightly using wood screw • Owner's Manual (not supplied) in the hole at the back of the base as shown. •... -
Page 4: Your Tv
11. RED/GREEN/YELLOW/BLUE (p. 9, 15, 17) Your TV Uses for EPG / teletext / FUN-LINK. 12. COLOUR SYSTEM (p. 8) Selects the colour input signal from external devices. 13. FUN-LINK buttons (p. 16) Functionally useful for FUN-LINK. (expand) / (subpage) / (hold) / (text) / (reveal) /... -
Page 5: Preparation For Use
Audio sometimes makes no sound if you select “Bitstream”, etc. Dear Customer, By connecting an HDMI cable to your Funai LCD TV, you have to use only a certified HDMI cable to guarantee a sufficient immunity against parasitic frequency radiation. -
Page 6: Plug In The Ac Power Cord
Composite Video Connection Initial Setup This section will guide you through the unit's initial setting which includes selecting a language for your on-screen menu and auto scan, which automatically scans and memorises Your device Your TV viewable channels. AUDIO OUT VIDEO OUT VIDEO IN AUDIO IN... -
Page 7: Operations
OPERATIONS Press SLEEP repeatedly to change the sleep time period. • Each time you press SLEEP, the timer increases by 30 minutes up to 120 minutes. Read this first • Press SLEEP repeatedly until [Off] appears to cancel the sleep These operations are accessible by remote control. -
Page 8: Tv Screen Information
13 Scrambled programme is displayed, when you are watching the scrambled Press AUDIO to display currently selected audio mode and programme. press repeatedly to cycle through the available audio mode. 14 Parental rating (p. 14) is displayed if the parental rating of TV programme is (e.g.) available. -
Page 9: Changing The Tv Screen Display Mode
For 4:3 video signal Changing the TV Screen Display Mode Selects the TV screen display mode You can select your favourite TV screen size. Auto automatically. Press ASPECT repeatedly to switch the TV screen display mode. Displays a 4:3 picture at its original size. -
Page 10: Other Settings
OTHER SETTINGS Features Features Colour Temperature Normal PICTURE Read this first SOUND Adaptive Luma Control Before adjust each setting, press MENU to display the menu. CHANNEL Backlight To exit the menu, press MENU. OTHERS Picture Adjustment LANGUAGE You can adjust the picture settings according to your personal preference. -
Page 11: Sound Adjustment
Sound Adjustment Auto Volume Control If set to [On], sudden changes in volume will be reduced You can adjust the sound settings according to your personal automatically, for example, during commercials or when preferences. switching channels. Use K / L to select [Auto Volume Control], then press Use K / L to select [SOUND], then press OK. -
Page 12: Channel Scan
Channel Scan Channel Skip When using / , the channel you selected will be You can scan the channel in your area automatically or search skipped. and store channels manually. Use K / L to select [Skip], then press OK. Use K / L to select [CHANNEL], then press OK. -
Page 13: Lock Settings
Colour System / Sound System Change PIN Code Change PIN Code Follow steps 1 to 7. Use K / L to select PICTURE New PIN Code [Colour System] or [Sound System], then press OK. SOUND Use K / L to select the settings you want, then press Confirmation CHANNEL OTHERS... -
Page 14: Subtitle Settings
Mixing Level Teletext You can adjust the audio volume for [Visually Impaired]. Make sure [Audio Type] is set to [Visually Impaired] at You can change the teletext settings. “Audio Settings” (p. 14). • Only MPEG sound is available for this function. Use K / L to select [OTHERS], then press OK. -
Page 15: Common Interface (Ci)
Use K / L to select [OTHERS], then press OK. • The set with FUN-LINK will interoperate without any problems with other Funai devices which comply with FUN-LINK. Use K / L to select [TV Settings], then press OK. Use K / L to select [OTHERS], then press OK. -
Page 16: Time Setup
To show the menu of connected your devices Use K / L to select [On] or [Off], then press OK. Make sure [FUN-LINK Control] and [Device Control] is set : Selects if you have connected an external device that to [On]. is compatible with the FUN-LINK function. -
Page 17: Software Download
Auto Standby Menu Language Selection You can set the unit to go standby mode automatically if no activity is detected after the power is turned on for 4 hours. You can select the menu language. In spite of this setting, the unit goes to the standby mode Use K / L to select [LANGUAGE], then press OK. -
Page 18: Troubleshooting Guide
TROUBLESHOOTING GUIDE Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save you time and money. Problem Possible Remedy • Is unit plugged in? Remote Control Doesn’t Work •... -
Page 19: Other Informations
•jpeglib.h •FreeType “License Statement” is written at the end of book. If you are interested in obtaining GPL source code used in this product, please contact Funai Electric Europe Sp. z o.o., ul. Inżynierska 1 Nowa Sól, 67-100 / Poland. -
Page 20: Declaration Of Conformity
Funai Electric Europe Sp. z o.o. • Never use a solvent or alcohol. Do not spray insecticide ul. Inżynierska 1 Nowa Sól, 67-100 / Poland liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.
Need help?
Do you have a question about the LED22H800 and is the answer not in the manual?
Questions and answers