Table of Contents
Advertisement
NLTroubleshooting
Malfunction
device pauses,
but the drum
running.
wrinkling.
and program
broken.
38
Cause and Troubleshooting
Cooling process active.
No error - no action required.
▶
The load quantity is too high.
Pay attention to the maximum load of the
▶
→ "Programs", Page 22 .
The laundry is left in the drum for too long after drying.
Remove the laundry from the drum immediately after
1.
drying.
Spread out the items to let them cool.
2.
Inappropriate program set for the type of fabric.
Set the appropriate program for the type of fabric.
▶
→ "Programs", Page 22
Easy care textiles dried too long.
→
"Change drying target", page 21 .
▶
→ "Adjust drying target", Page 21 .
▶
Anti-crease not activated.
Activate the anti-crease program.
▶
→ "Buttons", Page 19
Condensate tank filled.
→ "Emptying the condensate container", page 30 .
1.
→ "Push in the condensation container",
2.
page 30 .
→ "Starting the program", Page 26 .
3.
Water drain hose is kinked or pinched.
Make sure that the water drain hose is not kinked or
1.
pinched.
Lay the water drain hose without kinks.
2.
Water drain hose is not connected correctly.
Make sure that the water drain hose is connected
▶
correctly.
Water drain hose is clogged.
Flush the water drain hose with tap water.
▶
There is a foreign object in the bottom unit
→ "Open base unit", page 33 .
1.
Remove any foreign objects present.
2.
→ "Close base unit", page 35 .
3.
Advertisement
Table of Contents
