Table of Contents
Advertisement
NLCleaning and maintenance
Open the service door.
1.
If you place a cloth under the service
flap, you can collect the residual
water from the bottom unit.
Open the handle of the heat
2.
exchanger cover.
Pull out the heat exchanger cover by
3.
the handle.
Cleaning bottom unit
You can remove visible
contaminants from the bottom unit
34
Chance of cutting!
Sharp edges on the heat exchanger
can lead to cuts if touched.
▶
Opening the bottom unit
1.
Clean the heat exchanger cover with
2.
Carefully clean the fins of the heat
3.
ng in
n.
CAREFULLY
Do not touch the fins of the heat
exchanger.
→ Page 33 .
a soft brush.
Make sure all contaminants are
removed from the seal.
exchanger with the brush
attachment of a vacuum cleaner.
Make sure that the slats are
suctioned from top to bottom and
that they are not deformed or
damaged in the process.
Advertisement
Table of Contents
