Samsung RR39M7130WW User Manual page 33

Operations
04 Vacation (3 sec)
Vacation
05 Control Lock (3 sec)
Control Lock
06 Network connection
You can use the optional Smart Home Dongle (sold separately) to control and monitor your
refrigerator through the Samsung Smart Home app. For more information about Samsung
Smart Home, see the Samsung Smart Home section.
NOTE
• Recommended encryption systems include WPA/TKIP and WPA2/AES. Any newer or
unstandardized Wi-Fi authentication protocols are not supported.
• Wireless networks may be affected by the surrounding wireless communication
environment.
• If your Internet service provider has registered the MAC address of your PC or modem
for identification, your Samsung Smart Refrigerator may fail to connect to the Internet.
If this happens, contact your Internet service provider for technical assistance.
• The firewall settings of your network system may prevent your Samsung Smart
Refrigerator from accessing the Internet. Contact your Internet service provider for
technical assistance. If this symptom continues, contact a local Samsung service center
or retailer.
• To configure the wireless access point (AP) settings, see the user manual of the AP.
• Samsung Smart Refrigerators featuring the Samsung Smart Home Dongle support
both Wi-Fi 2.4 GHz with IEEE 802.11 b/g/n and Soft-AP protocols (IEEE 802.11 n is
recommended).
• Unauthorized Wi-Fi wireless routers may fail to connect to applicable Samsung Smart
Refrigerators.
32 English
Untitled-10 32
If you are going on vacation or a business trip, or if you do not intend
to use the fridge for an extended time, use the Vacation mode.
• To activate Vacation mode, press and hold Vacation for 3 seconds.
The Vacation On indicator turns on while the display of the
fridge temperatures will turn off. The fridge temperature will be
controlled under 17 °C.
• To deactivate Vacation mode, press and hold Vacation again for
3 seconds. The fridge temperature will return to the previous
setting.
NOTE
• Make sure to remove foods in the fridge compartment before using
Vacation mode.
• The Vacation mode will be disabled if you adjust the temperature.
To prevent accidents or unintended use of the controls, press and hold
Control Lock for 3 seconds to activate the Control Lock. All controls
will be disabled with the indicator ( ) on.
To deactivate, press and hold again for 3 seconds. The controls will be
enabled as normal.
2017-01-19 5:28:42