Agilent Technologies TwisTorr 74 FS AG User Manual page 170

Technical Information
J1 – IN-OUT
How to connect the outputs of the controller
The following figure shows a typical logic output connection of a
relay coil (other devices may be connected in the same way, e.g. a
LED, a computer, etc.) and the related simplified circuit of the
controller. The example figure refers to the programmable set
point signal on pins 11 and 9.
Figure 24
170/192
Typical output connection
TwisTorr 74 FS AG On-board Controller User Manual / 87-901-054-01