Agilent Technologies TwisTorr 74 FS AG User Manual page 167

How to connect the input of the controller
The typical connections of the input of the TWISTORR 74 FS AG
On-board to an external system are described below. Two cases are
considered:
Note that a 24 Vdc, 30 mA voltage, a GROUND signal and the input
pins are available on the connector.
Figure 21
TwisTorr 74 FS AG On-board Controller User Manual / 87-901-054-01
1. the customer supplies the 24 Vdc
2. the customer does not supply the 24 Vdc.
Case 1 external power supply
Technical Information
J1 – IN-OUT
167/192
17