BMW 4 Series 2023 Owner's Manual page 143

Manual Speed Limiter
The indicator light illuminates: the sys-
tem is switched on.
The indicator light flashes: the set
speed limit has been exceeded.
Additional information:
Manual Speed Limiter, refer to page 200.
Cruise Control
The system is active.
Additional information:
Cruise control, refer to page 202.
Active Cruise Control with Distance
Control
Indicator light illuminates: Vehicle has
been detected ahead of you. The vehi-
cle icon goes out if no vehicle in front is
detected.
Indicator lamp is flashing: vehicle ahead is
driving off.
Additional information:
Active Cruise Control with Distance Control, re-
fer to page 205.
Speed Limit Assistant activated
Depending on vehicle equipment, the
indicator light illuminates green, to-
gether with the icon for a cruise control
system. Speed Limit Assistant is active and
detected speed limits can be applied manually
for the displayed system.
Additional information:
Speed Limit Assistant, refer to page 212.
Speed Limit Assist: Apply speed limit
The detected speed limit can be ap-
plied with the SET button. As soon as
Online Edition for Part no. 01405A7D166 - II/23
Displays
the speed limit has been applied, a green
checkmark is displayed.
Additional information:
Speed Limit Assistant, refer to page 212.
Steering Assistant
The system is activated and helps to
keep the vehicle in the lane.
Additional information:
Steering Assistant, refer to page 215.
Automatic Lane Change Assistant:
lane change in progress
Arrow icon for lane change green: the
system carries out a lane change.
Additional information:
Automatic Lane Change Assistant, refer to
page 220.
Automatic Lane Change Assistant:
lane change not possible
Gray line for lane boundary on the ap-
propriate side: system detected a lane
change request. Lane change not cur-
rently possible.
Additional information:
Automatic Lane Change Assistant, refer to
page 220.
Automatic Lane Change Assistant:
functional requirements not met
Depending on the national-market ver-
sion:
Arrow icon for lane change gray: lane
change not possible; functional requirements
not met.
Additional information:
Automatic Lane Change Assistant, refer to
page 220.
CONTROLS
143
OwnersManuals2.com