Page 4
E188 有线扩音器 mini 功能示意 ③ ④ ⑤ ⑦ ⑥ ① ② ON” ① 电源开关:向“ 方向拨动旋钮,听到“哒”一声,表示扩音器已通电并进入人声 扩音状态,此时电源指示灯亮蓝灯,继续向“ON”方向拨动声音逐渐增大;反之向 “OFF”方向拨动则声音逐渐减少,直至听到“哒”一声关机。 ② 指示灯:电量充足时,指示灯常亮蓝灯;低电状态时红灯闪烁,请及时为扩音器充电; 充电过程中,指示灯常亮红灯,充满后蓝灯常亮。无线播放搜索配对状态下,指示灯蓝 灯快闪,配对成功后,蓝灯恢复常亮。 ③ “M”模式切换键:开机状态下,短按该按键可切换工作模式,并伴有相应的语音提示。 ④ MIC输入接口:将有线麦克风插头插入此孔,进入有线人声扩音状态。操作时,请不要 将麦克风的拾音面朝向扩音器的扬声器,以免产生啸叫。 充电接口:通过连接Type-C充电线为扩音器充电。 ⑤ 挂扣:用于安装肩带,可将扩音器斜挂于肩上使用。 ⑥ 背扣孔:用于安装背扣将扩音器扣于腰带或裤腰上使用。 ⑦...
Page 8
E188 mini Preface Dear Customer, Thank you for purchasing Takstar E188mini Wired Amplifier. To better understand and use the product, please read this manual thoroughly. If you have any questions or suggestions, please contact our local dealer. Features • Compact and lightweight mini voice amplifier.
• Charging Specifications: DC 5V/1A Headset Mic Parameters • Transducer: Back Electret Condenser • Polar Pattern: Unidirectional • Frequency Response: 100Hz-12.5kHz • Sensitivity: -47±3dB (0dB=1V/Pa, at 1kHz) Note: The above data are measured by Takstar laboratory which has the final interpretation right!
Wired Amplifier E188 mini Function Descriptions ③ ④ ⑤ ⑦ ⑥ ① ② ① Power Switch: Rotate the knob towards ON until you hear a click to power up the amplifier into voice amplification mode. The power indicator will light up blue. Continue rotating towards ON to gradually increase the v o l u m e .
Page 11
Wired Amplifier E188 mini ④ MIC Input Interface: Insert a wired mic to start wired voice amplification. During operation, please ensure that the pickup side of the mic is not facing the speaker of the voice amplifier to avoid feedback. ⑤...
2. Enter SETTINGS menu on your phone, find and enable wireless function, wait until "TAKSTAR E188mini" is discovered and tap on it to connect. When connected successfully, the function indicator will stay solid blue and there will be a voice prompt about wireless connected.
Page 13
Wired Amplifier E188 mini 2. If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch and unplug from power source, then send the product to the local after-sales service for repair. 3. Power adapter used, if any, should be approved by CCC certification or similar standards and comply with the power supply requirements.
This manual contains up-to-date technical specifications as of printing. However, specifications contained herein may not conform to your particular product since Takstar is constantly improving its products. Also, specifications, devices or accessories available may vary from region to region. If you have any questions, please contact our local sales outlet.
Need help?
Do you have a question about the E188 mini and is the answer not in the manual?
Questions and answers