Table of Contents
Advertisement
18
Connecting
OPTICAL IN connection
Connect an optical output jack of external devices
to the OPT. IN jack.
2
To the optical output jack of
external device
Speaker (easy) setup
Listens to sound from TV, DVD or Digital Device
with 4.1 or 4 ch mode.
1. Connect the OPT. IN jack on the back of the unit
to optical out jack of your TV (or digital device
etc.)
2. Select the input source to OPTICAL by pressing
FUNCTION on the remote control or F on the
unit until the function is selected.
To directly select the OPTICAL function, press
OPTICAL on the remote control.
3. Listen to sound with 4.1 or 4 ch speaker.
4. Press OPTICAL to exit from OPTICAL.
Function is retuned to previous one.
USB connection
Connect USB memory device to the USB port on
the back of the unit.
Connect a USB to the USB gender changer when
the unit is mounted on the wall.
For more information of playing files on a USB, refer
to the page 20.
Removing the USB Device from the unit.
1. Choose a different function/mode or press
Z twice in a row.
2. Remove the USB device from the unit.
Compatible USB devices
y MP3 Player : Flash type MP3 player.
y USB Flash Drive : Devices that support USB 1.1.
y The USB function of this unit does not support
some USB devices.
USB device requirement
y Devices which require additional program
installation connected to a computer, are not
supported.
y Do not extract the USB device while in operation.
y For a large capacity USB, it may take longer than
a few minutes to be searched.
y To prevent data loss, back up all data.
y This unit is not supported when the total
number of files is 1000 or more.
y The unit's USB Port cannot be connected to PC.
The unit can not be used as a storage device.
y The exFAT file system is not supported on this
unit. (FAT16/FAT32/NTFS systems are available.)
Advertisement
Table of Contents
