Download Print this page
Toa D-911 Instruction Manual
Toa D-911 Instruction Manual

Toa D-911 Instruction Manual

Vca fader unit

Advertisement

Quick Links

D-911 VCA FADER UNIT
Thank you for purchasing TOA's D-911 VCA Fader unit.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
1. GENERAL DESCRIPTION
The D-911 VCA Fader Unit is designed to be used in
conjunction with the D-901 Digital Mixer. Connecting to the
D-984VC VCA Control Module permits volume adjustment
of all the channels and contact controls of the D-901 Mixer.
2. HANDLING PRECAUTIONS
• The D-911 Fader Unit is connected to the VCA control
modules mounted in the D-901 Digital Mixer. Connect
each of eight terminals to
the D-984VC's terminal of
the same name by way of
the fully-connected straight
cable as shown on the
right.
• Use the D-901 firmware of version 3.0 or later. Firmware
versions earlier than it cannot be used in conjunction with
the fader unit.
The firmware version number can be confirmed on the D-
901's front panel-mounted display.
[Display example]
T O A
D - 9 0 1
S e r i e s
S o f t w a r e
V e r 3 . 0 0
If your firmware version is old, download the latest
software program and the "D901 PC software instruction
manual" from the TOA Internet product data site
[http://www.toa-products.com/]. For the update
procedure, refer to the instruction manual.
• For channels with stereo link or group settings
established at the D-901, the lowest numbered channels
in the stereo linked or grouped channels are enabled.
• Control's knob position 10 of the D-911 provides the
channel gain set by the D-901. As a guide, knob position
8 provides about 10 dB below the gain set by the D-901.
4. SPECIFICATIONS
Power Supply
5 V DC (supplied from the optional D-984VC)
Connector
RJ45 connector x 8
Input Fader Control
Input fader (100 mm) x 12
Output Volume Control
Output volume control x 8
Contact Control
Illuminated switch x 8
Remote Output
No-voltage make contact output
(contact capacity: 30 V DC, 4 A)
Remote Switch
Seesaw switch for activating the remote function of the
power distributor
Finish
Panel: Pre-coated steel plate, black (30% glossy)
Dimensions
482.6 (w) x 177 (h) x 61.3 (d) mm
(excluding projection)
Weight
2.7 kg
[Connection]
1
1
2
2
3
3
4
4
5
5
6
6
1 – 8
1 – 8
7
7
8
8
INSTRUCTION MANUAL
3. BLOCK DIAGRAM
DC
VCA
IN CH 1-6
DC
VCA
IN CH 7-12
DC
VCA
OUT CH 1-4
DC
VCA
OUT CH 5-8
Make contact
CTRL
IN 1-4
DC
CTRL
OUT 1-4
CTRL
IN 5-8
CTRL
OUT 5-8
• Accessories
Fader knob (Red, Yellow)
Volume knob (Red)
Rack mounting screw ............................................. 4
Rack mounting fiber washer .................................. 4
Rack mounting bracket (preinstalled on the unit) ... 2
* Convenient for color coding to distinguish
channels to which stereo link or group
settings are assigned.
Note
The design and specifications are subject to
change without notice for improvement.
D-911
1
6
7
12
1
4
5
8
1
4
1
4
5 – 8
Same as above
*
............................ 3 each
*
.............................................. 2

Advertisement

loading
Need help?

Need help?

Do you have a question about the D-911 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Toa D-911

  • Page 1 Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. 1. GENERAL DESCRIPTION The D-911 VCA Fader Unit is designed to be used in conjunction with the D-901 Digital Mixer. Connecting to the D-984VC VCA Control Module permits volume adjustment of all the channels and contact controls of the D-901 Mixer.
  • Page 2 5. NOMENCLATURE AND FUNCTIONS [Front] 1. Input volume controls Adjust the volume of connected input equipment, such as a microphone and CD player. Knob position 0 reduces the volume to its lowest setting and position 10 increases the volume to its highest setting. 2.