Ricoh 407773 User Manual page 73

Problem
Fine lines are fuzzy with
inconsistent thickness or color,
or do not appear.
Images appear only partially
colored.
When printing is performed
using the USB device server, a
print job cannot be completed
properly.
Cause
Super fine lines have been
specified in the application, or a
color that is too light has been
specified for the lines.
The paper is damp.
Even if the USB device server
has received the data
successfully, the printer cannot
complete the print job properly
because the timeout period set
on the printer is too short.
Other Printing Problems
Solution
PostScript 3:
Change the dithering settings on
the printer driver. For details
about the dithering settings, see
the printer driver Help.
If the problem continues after
you change the dithering
settings, use the settings of the
application in which the image
was created to change the color
and thickness of the lines.
Use paper that has been stored
in the recommended
temperature and humidity
conditions. For details about the
proper way to store paper, see
page 32 "Paper Precautions".
Specify a longer period for
[I/O Timeout] using the printer's
control panel.
71