Table of Contents
Advertisement
48. Daylight Saving Time (Command: s d)
Sets Daylight Savings Time.
Transmission
[s][d][ ][Set ID][ ][Data1][ ][Data2][ ]
[Data3][ ] [Data4][ ][Data5][ ][Cr]
Data 1 00: Off (Data 2-5: FF)
01: Start time
02: End time
Data 2 01-0C: January to December
Data 3 01 to 06: Weeks 1 to 6
* The maximum value of [Data3] may vary depending on the date.
Data 4 00 to 06 (Sunday to Saturday)
Data 5 00 to17: Hour 00 to hour 23
* If you wish to read the start/end times, enter FF for parameters
[Data2] through [Data5].
(E.g. 1: sd 01 01 ff ff ff ff - Checks the end time.)
(E.g. 2: sd 01 02 ff ff ff ff - Checks the start time.)
* This feature only works when Clock 1 (year/month/day) and
Clock 2 (hour/minute/second) have been set.
Acknowledgment
[d][ ][Set ID][ ][OK/NG][Data1][Data2]
[Data3][Data4][Data5][x]
* This feature may not be supported on some models.
49. PM Mode (Command: s n, 0c)
Sets the PM mode.
Transmission
[s][n][ ][Set ID][ ][0c][ ][Data][Cr]
Data
00: Activates Power Off mode
01: Activates Sustain Aspect Ratio mode
02: Activates Screen Off mode
03: Activates Screen Off Always mode
04: Activates Screen Off & Backlight mode
Acknowledgment
[n][ ][Set ID][ ][OK/NG][0c][Data][x]
* This feature may not be supported on some models.
50. ISM Method (Command: j p)
Selects an ISM method.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
01: Inversion (Invert)
02: Orbiter (Move)
04: White Wash (Remove; white pattern)
08: Normal (Standard)
20: Color Wash (Color pattern)
80: Washing Bar
90: User Image
91: User Video
* The jp command only works when the timer has been set to
Immediately.
Acknowledgment
[p][ ][Set ID][ ][OK/NG][Data][x]
* This feature may not be supported on some models.
63
Advertisement
Table of Contents
