Table of Contents
Advertisement
OPS Control
•
OPS Power Control: This feature enables you to control the power of the OPS as you turn on/off the display.
- Disable: Disable OPS Power Control.
- Sync (On): Synchronize the monitor's power status only when the monitor is on.
- Sync (On/Off): Synchronize the monitor's power status with the OPS.
•
Control Interface Selection: This feature enables you to configure communication with the OPS connected to
your monitor.
- Display: Enable communication with external serial ports.
- OPS: Enable communication with the OPS connected to your monitor.
Background Image
This feature enables you to set the default background image.
•
Booting Logo Image: Change the logo image that appears when the device boots up. If you set this option to Off,
•
No Signal Image: Changes the image that appears when there is no signal. If you set this option to Off, no image
appears when there is no signal.
Input Manager
This feature enables you to specify a label for each input source.
•
PC: PC input devices
•
DTV: HDMI, satellite and set-top boxes, DVD players, Blu-ray players, home theaters, game consoles, streaming boxes,
and camera input devices.
no logo image appears when the device boots up.
19
Advertisement
Table of Contents
