Table of Contents
Advertisement
Using the Recommended Tone
1.
In the Dance Music Mode, long-press
FUNCTION.
This momentarily displays "RECOMMENDED" and
assigns the tone recommended for the currently selected
pattern.
• If you change the tone setting while the Dance Music Voice
setting is enabled, the tone will not change until you disable
the Dance Music Voice setting.
Using a Dance Music Voice
1.
In the Dance Music Mode, press the VOICE
button.
This causes "VOICE" to appear, which indicates that the
Melody/Voice Keyboard has been changed from Melody
Tone to Voice Tone.
• To return to the Melody Tone, press the VOICE button
again.
• Dance Music voices are not affected by Transpose and
Sustain settings.
Using Effects
Pressing an Effect Switch key during pattern play applies one
of the effects described below to the entire song.
Keyboard Key Function
FX1
MOD LPF*
FX2
MOD HPF*
FX3
FLANGER
FX4
LO-FI
*1 Modulation Low Pass Filter
*2 Modulation High Pass Filter
• The display shows the applicable function name while an
effect is being applied.
• An effect is applied as long as its keyboard key is
depressed, and stops being applied when the key is
released.
• The application manner of MOD LPF and MOD HPF
changes with the tempo.
• Effects are applied to overall pattern play, and cannot be
applied to individual parts.
EN-27
Playing in the Dance Music Mode
Effect, Description
1
Cuts the high-range
frequencies of the sound.
2
Cuts the low-range
frequencies of the sound.
Applies an undulating surge
effect to the sound.
Reduces the resolution of
the sound.
Advertisement
Table of Contents
