Listening To Demo Play - Casio LK-S250 User Manual

Specifying the Metronome Sound and Beats
Per Measure
You can use the procedure below to configure a setting that
sounds a chime on the first beat of each measure, and a click
for the remaining beats.
• Available settings are Off, or a value of 1 to 16 beats.
1.
Start the metronome.
2.
Rotate the dial or use the – and + buttons to
specify the number of beats per measure.
• Selecting "Off" disables the chime and sounds a click
for all beats. Use this setting when you want to
practice without worrying about the first beat of each
measure.
• To return the setting to its initial default, press the –
and + buttons at the same time.
• To display the metronome volume level setting screen,
press VOLUME (3 buttons).
Changing the Metronome Sound Volume
Level
1.
Start the metronome.
2.
Press VOLUME (3 buttons).
This displays the metronome volume level setting
screen.
3.
Rotate the dial or use the – and + buttons to
change the volume value.
• You can specify a volume value from 0 to 127.
• To return the setting to its initial default, press the –
and + buttons at the same time.
• To display the beat setting screen, press the BEAT
button.

Listening to Demo Play

You can use Demo Play to play built-in songs in sequence.
1.
While holding down TEMPO, press a.
This displays the [DEMO] screen and starts song number
"1".
• The display shows the number and name of the
current song.
• For a list of song titles, see the
EN-49).
• To return to the home screen, press the EXIT button.
2.
To change from the current song to another
one, rotate the dial.
This starts Demo Play of the song you selected.
• After you rotate the dial once to select an option, you
also will be able to change the selection using the –
and + buttons.
• To go back to the previous screen, press the BACK
button.
3.
To exit Demo Play, press the EXIT button or
a.
EN-11
Playing on the Keyboard
"Song List" (page