universalblue UCDH8001-20 Instruction Manual page 28

2. Inside drying: press the key to start the function.
3. Fan: press the key to choose high or low fan speed.
4.
mode, it will indicate the actual room humidity. You can also
set the humidity from "setting humidity". In timer mode, it
indicates the setting time.
5. Humidity setting: in auto dehumidifying mode, press
the key to set humidity. The humidity range is from 30% to
80%. You can increase it 5% by every press.
6. Mode selection: after unit is on, press the key to choose
auto dehumidifying & cloth dry modes. The lights will flash
when you choose these modes.
7. On/Off: press the key to turn on/ off the unit.
SETTING THE TIMER
• Setting a shutdown time (Timer off):
When the unit is working, press 'Timer' to set a time for its
shutdown. To select the shutdown time, press 'Humidity setting'
button. With each press, time will increase by 1 hour, being the
minimum 1 hour and the maximum 24 hours. Once set, the light
indicator will flick 5 times as confirmation. When the programmed
time arrives, the unit will shut down.
Display screen: in auto dehumidifying or cloth dry
28