Troubleshooting
◆ All Reset
When the watch does not work properly, you can reset all the settings. If the
power reserve is insufficient, fully charge the watch as outlined on page 15.
Check before performing All Reset.
After performing All Reset, you will need to configure all settings.
Completely set the watch by following the procedures outlined below:
1. Correct the reference position. See page 51.
2. Set the city. See page 22.
• To set Daylight Saving Time, see page 27.
3. Set the time.
To adjust the time by receiving the time signal, see page 43. To adjust the time
manually, see page 45.
58
◆ Performing the All Reset
Perform this operation after checking the contents of the previous page in this
manual.
1. Pull the crown out to position .
Ⓑ
2. Press and hold both the lower right button Ⓐ and the
upper right button Ⓑ for four or more seconds.
0 1
2
All Reset will be performed.
The settings will be reset as follows:
The settings after All Reset
Ⓑ
• Reference positions of hands/date : Positions when the
• Calendar
• City
• Daylight Saving Time
• Switching of Daylight Saving Time : Auto
Troubleshooting
crown is pushed in.
: Leap year, January/Sunday
: LON (London)
: OFF (Standard time)
59