Forward-Facing Latch: Lower Anchor + Tether Install - Cosco MIGHTY FIT 65 Manual

Convertible car seat
Table of Contents

Advertisement

Forward-Facing LATCH:
43
Lower Anchor + Tether Install
Do not use the lower anchors of the child restraint anchorage
system (LATCH system) to attach this child restraint when
restraining a child weighing more than 40 lbs (18 kg).
Before you begin installing the seat
into your vehicle, did you check:
Your child's weight and height?
22-40 lb (10.1-18 kg) and
29-49 in. (73.6-125 cm)
Your child's fi t? See page 9.
Do you need to make adjustments to the
harness/headrest height or the buckle position?
1
Remove Lower Anchor Belt
from Storage Location
Remove it from the rear-facing belt
path so both hooks are on the same
side of the seat.
2
Route the Lower Anchor Hook
Through the Forward-Facing
Belt Path As Shown
Pull it across the seat. Then thread it
through the other belt path opening.
The lower anchor belt adjuster can be
on either side of the car seat.
Do not twist belt.
3
Finished Lower Anchor
Belt Routing
4
Pull Recline Stand Out From
Under Seat and Push Up to
Lock in Place
44
continued on next page

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mighty fit 65 dxMighty fit 65 lx

Table of Contents