Table of Contents
Advertisement
9-2 Factory Mode
1.
Press MENU, then 8893 on the remote
control to open the Factory Setting
menu.
2.
Press
to highlight a setting, then
press OK to enter the setting.
3.
Use the
and OK buttons to
adjust or view the settings.
4.
Press MENU to return to the previous
menu or press EXIT to close the
factory menu.
5.
Factory Settings:
GENERAL SETTING - To adjust
general settings such as LVDS map.
Logo, Power, White pattern, PWM,
Hotel Mode and Language type.
PICTURE - To adjust the picture
settings, such as Backlight, W/B Adjust,
PQ Nonlinear, Color Setting,
Luma_other, Peaking Setting, NR
Setting, CTI Setting, Gamma, DLC and
VIP.
SOUND - To adjust the sound settings,
such as Sound Mode, Volume Curve,
and Audio Output.
ADC ADJUST - To perform ADC
adjusting
System Info - To view software
information
Software Update (USB) - Perform
software update via a USB device.
See next page for more information.
Factory Init - To reset TV to factory
defaults.
Aging Mode - To turn burn mode on or
off.
46
Advertisement
Table of Contents
