Compliance With Rohs Directive; Package Information; Plug Wiring - Beko 01M-8813893200-2518-01 User Manual

1 Important safety and
environmental instructions

1.3 Compliance with RoHS Directive

The product you have purchased complies with EU RoHS Directive
(2011/65/EU). It does not contain harmful and prohibited materials spec-
ified in the Directive.

1.4 Package information

Packaging materials of the product are manufactured from recy-
clable materials in accordance with our National Environment
Regulations. Do not dispose of the packaging materials together
with the domestic or other wastes. Take them to the packaging
material collection points designated by the local authorities.

1.5 Plug Wiring

The moulded plug on this appliance incorporates a 13 A fuse. Should the
fuse need to be replaced an ASTA approved BS1362 fuse of the same
rating must be used. Do not forget to refit the fuse cover. In the event of
losing the fuse cover, the plug must not to be used until a replacement
fuse cover has been fitted. Colour of the replacement fuse cover must be
the same colour as that visible on the pin face of the plug Fuse covers are
availabe from any good electrical store.
•
Fiting a different plug
• As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals on
your plug, proceed as follows:
• Brown cable = L (Live)
• Blue cable = N (Neutral)
11 / EN