Download Print this page

Ikelite WD-4 Instructions page 2

Wide angle conversion dome

Advertisement

5.
Stow the housing and dome lens in a shaded place
where it is protected from impact or overheating. If no
shade is available, we recommend covering the housing
with a towel or cloth.
Travel and Storage
1.
Clean and dry the exterior of the dome lens. DO NOT
use any type of alcohol or glass or surface cleaner on the
dome lens.
2.
Attach the protective neoprene cover.
3.
Store in a cool, dry place.
Scratches
Often scratches will fill in with water and become invisible in
the resulting image. Scratches are most likely to show up in
your image when shooting towards the sun or a light source.
Light scratches may be buffed out using NOVUS plastic
polish, available in single-use packets or bottles.
If the scratches are too deep to polish out, the dome lens will
need to be returned to Ikelite for replacement of the acrylic
front.
Limited Warranty
This Ikelite product is warranted against any manufacturing
defects for a period of one (1) year from the original date
of purchase. To obtain warranty service, the product must
be returned to Ikelite postage paid. Ikelite will, at its sole
discretion, repair or replace such products, and will return
to customer postage paid. All other claims of any nature are
not covered. Except as mentioned above, no other warranty
expressed or implied applies to this Ikelite product.
Contact Us
Ikelite Underwater Systems
50 W 33rd St
Indianapolis, IN 46208 USA
(317) 923-4523
ikelite@ikelite.com

Advertisement

loading

This manual is also suitable for:

6430.4