MICRO-AIR WC1200 Installation And Operation Manual

Table of Contents

Download this manual

MODEL WC1200

Installation and Operation Manual

Important:

This manual contains speciﬁ c cautionary statements relative to worker safety. Read this manual thoroughly and follow

as directed. It is impossible to list all the hazards of dust control equipment. All persons involved with the equipment or

systems should be instructed how to operate in a safe manner.

Table of Contents

Need help?

Do you have a question about the WC1200 and is the answer not in the manual?

Page 1 MODEL WC1200 Installation and Operation Manual Important: This manual contains speciﬁ c cautionary statements relative to worker safety. Read this manual thoroughly and follow as directed. It is impossible to list all the hazards of dust control equipment. All persons involved with the equipment or...
Page 2 MICRO AIR WC1200 ® CLEAN AIR SYSTEMS MODEL WC1200 SPECIFICATIONS ASSEMBLY OF UNIT: INPUT VOLTAGE: Determine the location where the air cleaner is to be 208-230V / 460V 60Hz 3 Phase installed. Be sure to allow sufﬁ cient room around the unit...
Page 3 WC1200 MICRO AIR ® CLEAN AIR SYSTEMS All electrical work must be done by a GENERAL MAINTENANCE: 1. No lubrication is required for the motor because it is a qualiﬁ ed electrician according to local, state permanent pre-lube design. Excessive dirt should be and national codes.
Page 4 MICRO AIR WC1200 ® CLEAN AIR SYSTEMS Offgas Motorized Damper. Inlet Collar. Automatic Fill Valve. Overﬂ ow Port Low Level Sensor. Drain Port. WC1200 CONNECTION DETAIL...
Page 5 WC1200 MICRO AIR ® CLEAN AIR SYSTEMS 208/230/460 Volt Wiring Diagram...
Page 6 MICRO AIR WC1200 ® CLEAN AIR SYSTEMS WC1200 PARTS LIST ITEM PART NO. DESCRIPTION P2586 2 HP Motor 34530-02 Motor Mounting Plate P2583 Blower Housing P2584 Blower Inlet Plate P2574 Offgas Damper P2582 Blower Wheel P2585 Mesh Filter P2573 Fill Valve...