THIEL Model SCS3 Coherent Source ® loudspeaker system OWNER INFORMATION...
Page 2
CONNECTING THE SPEAKERS The SCS3’s input terminals are located on the rear of the speaker. The SCS3 uses a 5-way binding post which accepts several types of speaker cable termination. Make sure that all connections are tight.
Page 3
2) A speaker with a low efficiency of 84dB/W-m will require twice the power of an average 87dB/W-m speaker and one with a high rating of 90dB/W-m will require only half the power of an average speaker. The SCS3 is of average efficiency (87dB) and therefore can achieve average output levels with an average amount of power.
Page 4
GRILLE The SCS3 grille frame is designed to not produce diffraction so there is no sonic reason to remove it. If you do need to remove the grille, pull the grille frame away from the top (short side) of the speaker, then from the bottom.
THIEL warrants every THIEL model SCS3 speaker against defects in materials and workmanship to the original owner for a period of ten years from the date of purchase. THIEL will, at no charge, replace any defective part and make any repairs necessary to ensure its proper performance when the defective unit is returned to us postpaid.
Need help?
Do you have a question about the Coherent Source SCS3 and is the answer not in the manual?
Questions and answers