Table of Contents
Advertisement
Click the item of Parallel: Set Clock to 120000 Hz.
8. Click Batch,
Select the path of the File: bat.txt
Select bat.txt and click to open it:
Click "OK" to start the process of burning the program. The following screen appears when the process if
finished.
If you want to update the software next time, you just need to click the pull-down menu to select the
desired Batch file and execute it in the following screen.
Note: Do not cut off the power or turn off the unit during the burning process, or the flash may be
damaged.
Check the following if you fail to update:
1. Check whether all cables are properly connected.
2. Check the settings of Gprobe.
3. It is wrong if the Gprobe shows as the following icon.
Now just click the icon of
to show
icon.
9
Advertisement
Table of Contents
Troubleshooting
