Table of Contents
Advertisement
18 Basic settings
You can configure the basic settings for your appliance to meet your needs.
18.1 Overview of the basic settings
Display
Setting
Childproof lock
→ "Childproof lock", Page 12
Audible signals
Volume of the audible signals
Assign one of the time-setting programme
functions to
→ "Time-setting options", Page 10
Power limitation
This enables you to limit the total power of
the hob, if required, due to the circum-
stances of your electrical installation. Ob-
serve the regulations of the local electricity
suppliers. The available settings depend on
the maximum power of the hob. You can find
more information on the rating plate. If the
function is switched on and the hob has
reached the set power limit, the required and
permitted power level flashes and you can-
not select a higher power level.
Demo mode
Demonstration mode for the hob: When you
switch on the hob,
seconds and the cooking zones do not heat
up.
Cookware test
You can use this function to test the quality
of the cookware.
→ "Cookware test", Page 14
-
cookConnect System
The settings are configured based on the ex-
tractor hood model.
Restoring factory settings
1
Factory setting
18.2 To go to the basic settings
Requirement: The hob must be switched off.
To switch on the hob, touch
1.
Within the next 10 seconds, touch and hold
2.
seconds.
Product information
Customer service directory
Production number
on the control panel.
lights up for a few
.
for 4
Display
Value
1
- Manual.
- Automatic.
- Function switched off.
- The confirmation signal, the fault signal and the sig-
nal for incorrect use are deactivated.
- The fault signal is activated.
- The confirmation signal and the signal for incorrect
use are activated.
- All signal tones are switched on
- Quiet.
– Medium.
1
– Loud.
1
- Switch-off timer.
- Timer.
The power is increased by 500 W with each level.
– Switched off. Maximum power of the hob
- 1000 W. Lowest power setting.
. - 1500 W.
...
- 3000 W.
. - 3500 W.
- 4000 W.
. - 4500 W.
...
- Maximum power of the hob.
1
- Switched off.
- Switched on.
- Not suitable.
- Not optimal.
- Suitable.
→ "Overview of the hood control settings", Page 17
1
- Individual settings
.
- Factory settings.
Product information
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. Touch
to view the individual displays.
Touch
to access the basic settings.
3.
and light up as a presetting.
a
Touch
repeatedly until the desired setting ap-
4.
pears.
Basic settings en
1
.
1
.
Display
13
Advertisement
Table of Contents
