Display Module Troubleshooting; General Instructions For Display Troubleshooting - Nokia RM-579 Service Manual

Display module troubleshooting

General instructions for display troubleshooting

Context
• The display is in a normal mode when the phone is in active use.
• Display is in a partial idle mode when the phone is in the screen saver mode.
• The operating modes of the display can be controlled with the help of
Display blank
Image on the display not correct
Visual defects (pixel)
Item
1 Defect
counts
2 Combine
d defect
counts
Page 3 –20
Table 4 Display module troubleshooting cases
Table 5 Pixel defects
White dot defect
R G
1 1
Not allowed.
Two single dot defects that are within 5 mm of each other should
be interpreted as combined dot defect.
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
BB Troubleshooting and Manual Tuning Guide
There is no image on the display. The display looks
the same when the phone is on as it does when the
phone is off. The backlight can be on in some cases.
Image on the display can be corrupted or a part of
the image can be missing. If a part of the image is
missing, change the display module. If the image is
otherwise corrupted, follow the appropriate
troubleshooting diagram.
Pixel defects can be checked by controlling the
display with Phoenix. Use both colours, black and
white, on a full screen.
The display may have some random pixel defects
that are acceptable for this type of display. The
criteria when pixel defects are regarded as a display
failure, resulting in a replacement of the display, are
presented the following table.
B White
Dot
Total
1 1
RM-578; RM-579
Phoenix .
Black dot Total
defect
1 1
Issue 3