Nokia RM-364 Service Manual page 31

RM-364
Service Devices and Service Concepts
Issue 1
PKD-1
SW security device is a piece of hardware enabling the use of the
service software when connected to the parallel (LPT) port of the PC.
Without the device, it is not possible to use the service software.
Printer or any such device can be connected to the PC through the
device if needed.
RJ-215
RJ-215 is a jig used for soldering and as a rework jig for the engine
module. It is used together with the ST-66 stencil.
RJ-216
RJ-216 is a jig used for soldering and as a rework jig for the engine
module. It is used together with the ST-67 stencil.
SB-6
The SB-6 test box is a generic device to perform Bluetooth bit error
rate testing and doing cordless FBUS connection via Bluetooth.
SPS-2
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
SW security device
Rework jig
Rework jig
Bluetooth tester
Soldering paste
spreader
Page 2 –9